COMMAND LIST     2/190 77-CRA 119 1170/1 Uen A    

BGF Command List

© Copyright Ericsson AB 2009. All rights reserved.

Disclaimer

No part of this document may be reproduced in any form without the written permission of the copyright owner. The contents of this document are subject to revision without notice due to continued progress in methodology, design and manufacturing. Ericsson shall have no liability for any error or damage of any kind resulting from the use of this document.

Trademark List

SmartEdge is a registered trademark of Telefonaktiebolaget L M Ericsson.

Contents

1Contents of This Document

2

Master Command List

3

Global Configuration Commands

4

Context-Specific Configuration Commands

5

SCTP Commands

6

Operational Commands


1   Contents of This Document

This document provides hyperlinks to all the commands used to configure, monitor, and troubleshoot Border Gateway Function (BGF) features on the SmartEdge® router. The lists include the master command list, global configuration commands, context-specific configuration commands, SCTP commands, and operational commands.

2   Master Command List

This section provides links to the syntax and usage guidelines of all Border Gateway Function (BGF) CLI commands in the SmartEdge OS:

3   Global Configuration Commands

This section provides links to the commands used in the SmartEdge BGF as part of global configuration:

4   Context-Specific Configuration Commands

This section provides links to the commands used to configure the SmartEdge BGF within a specific context:

5   SCTP Commands

This section provides links to the commands used to monitor and administer the Stream Control Transmission Protocol (SCTP):

6   Operational Commands

This section provides links to the commands used to monitor and administer BGF features: