DIAGNOSTIC MESS. DESC     3/198 22-CRA 119 1170/1 Uen A    

ATM Module 

Log Messages Guide

© Copyright Ericsson AB 2009. All rights reserved.

Disclaimer

No part of this document may be reproduced in any form without the written permission of the copyright owner.

The contents of this document are subject to revision without notice due to continued progress in methodology, design, and manufacturing. Ericsson shall have no liability for any errors or damage of any kind resulting from the use of this document.

Trademark List

SmartEdge is a registered trademark of Telefonaktiebolaget L M Ericsson.

Contents

1Introduction
1.1EVNT_ATM_AAA10_ERR
1.2EVNT_ATM_AAA11_ERR
1.3EVNT_ATM_AAA12_ERR
1.4EVNT_ATM_AAA1_ERR
1.5EVNT_ATM_AAA2_ERR
1.6EVNT_ATM_AAA3_ERR
1.7EVNT_ATM_AAA4_ERR
1.8EVNT_ATM_AAA5_ERR
1.9EVNT_ATM_AAA6_ERR
1.10EVNT_ATM_AAA7_ERR
1.11EVNT_ATM_AAA8_ERR
1.12EVNT_ATM_AAA9_ERR
1.13EVNT_ATM_AAA_AUTHOR1
1.14EVNT_ATM_AAA_AUTHOR2
1.15EVNT_ATM_AAA_AUTHOR3
1.16EVNT_ATM_AAA_AUTHOR_ERR
1.17EVNT_ATM_APS_CLEAR_CCT
1.18EVNT_ATM_APS_PROT1
1.19EVNT_ATM_APS_PROT2
1.20EVNT_ATM_APSSWITCH_ERR
1.21EVNT_ATM_ARTPKTLEN_ERR
1.22EVNT_ATM_ATM_FLUSH_ERR
1.23EVNT_ATM_ATMWFQDB1_ERR
1.24EVNT_ATM_ATMWFQDB2_ERR
1.25EVNT_ATM_ATMWFQDB3_ERR
1.26EVNT_ATM_ATMWFQDB4_ERR
1.27EVNT_ATM_BE_ERR
1.28EVNT_ATM_BINDDB3_ERR
1.29EVNT_ATM_BINDITF1_ERR
1.30EVNT_ATM_BINDITF2_ERR
1.31EVNT_ATM_BINDITF3_ERR
1.32EVNT_ATM_BINDUPDATE_ERR
1.33EVNT_ATM_BINDVLAN1_ERR
1.34EVNT_ATM_BLKPROFDEL_ERR
1.35EVNT_ATM_BWCNTDB1
1.36EVNT_ATM_BWCNTDB2
1.37EVNT_ATM_BWCNTDB3
1.38EVNT_ATM_BWCNTDB4
1.39EVNT_ATM_BWCNTINIT_ERR
1.40EVNT_ATM_CAMALLOC_ERR
1.41EVNT_ATM_CAMCARDCRT_ERR
1.42EVNT_ATM_CAMCARDDEL_ERR
1.43EVNT_ATM_CAMCOSADD_ERR
1.44EVNT_ATM_CAMCOSLMT_ERR
1.45EVNT_ATM_CAMCOSRM_ERR
1.46EVNT_ATM_CAM_ENTRY_ERR
1.47EVNT_ATM_CAM_IDX_ERR
1.48EVNT_ATM_CAMPGUPDATE_ERR
1.49EVNT_ATM_CAMREINTERR
1.50EVNT_ATM_CARDCRT_ERR
1.51EVNT_ATM_CARDDB3_ERR
1.52EVNT_ATM_CARDDEL_ERR
1.53EVNT_ATM_CARDSARIMG_ERR
1.54EVNT_ATM_CARDTYPE_ERR
1.55EVNT_ATM_CCCT_ALLOC_ERR
1.56EVNT_ATM_CCOD_AAA1_ERR
1.57EVNT_ATM_CCOD_AAA2_ERR
1.58EVNT_ATM_CCOD_ACT1_ERR
1.59EVNT_ATM_CCOD_ACT2_ERR
1.60EVNT_ATM_CCOD_ACT3_ERR
1.61EVNT_ATM_CCOD_ACT6_ERR
1.62EVNT_ATM_CCOD_INIT1_ERR
1.63EVNT_ATM_CCOD_INIT2_ERR
1.64EVNT_ATM_CCODMODE_ERR
1.65EVNT_ATM_CCOD_PROTO1_ERR
1.66EVNT_ATM_CCODRESADDERR
1.67EVNT_ATM_CCODRESDEC_ERR
1.68EVNT_ATM_CCODRESDELERR
1.69EVNT_ATM_CCODRESINC_ERR
1.70EVNT_ATM_CCTCNTCRT_ERR
1.71EVNT_ATM_CCTCNTDEL_ERR
1.72EVNT_ATM_CCTCNTINIT_ERR
1.73EVNT_ATM_CCT_CREATE
1.74EVNT_ATM_CCTCRT_ERR
1.75EVNT_ATM_CCTDB1
1.76EVNT_ATM_CCTDB2
1.77EVNT_ATM_CCTDB3
1.78EVNT_ATM_CCTDB4
1.79EVNT_ATM_CCTDEREF_ERR
1.80EVNT_ATM_CCTDYNDB1_ERR
1.81EVNT_ATM_CCTDYNDB2_ERR
1.82EVNT_ATM_CCTDYNDB3_ERR
1.83EVNT_ATM_CCTDYNDB4_ERR
1.84EVNT_ATM_CCT_EVT10_ERR
1.85EVNT_ATM_CCT_EVT11_ERR
1.86EVNT_ATM_CCT_EVT12_ERR
1.87EVNT_ATM_CCT_EVT13_ERR
1.88EVNT_ATM_CCT_EVT14_ERR
1.89EVNT_ATM_CCT_EVT15_ERR
1.90EVNT_ATM_CCT_EVT1_ERR
1.91EVNT_ATM_CCT_EVT2_ERR
1.92EVNT_ATM_CCT_EVT3_ERR
1.93EVNT_ATM_CCT_EVT4_ERR
1.94EVNT_ATM_CCT_EVT5_ERR
1.95EVNT_ATM_CCT_EVT6_ERR
1.96EVNT_ATM_CCT_EVT7_ERR
1.97EVNT_ATM_CCT_EVT8_ERR
1.98EVNT_ATM_CCT_EVT9_ERR
1.99EVNT_ATM_CCTHALLOC_ERR
1.100EVNT_ATM_CCTOPCFG_ERR
1.101EVNT_ATM_CCTPARTCFGERR
1.102EVNT_ATM_CCTPROFUP_ERR
1.103EVNT_ATM_CCT_PROTO1
1.104EVNT_ATM_CCT_PROTO2
1.105EVNT_ATM_CCTRESDEC_ERR
1.106EVNT_ATM_CCTRESINC1_ERR
1.107EVNT_ATM_CCTRESINC_ERR
1.108EVNT_ATM_CCTSTATEERR
1.109EVNT_ATM_CCT_UPDATE
1.110EVNT_ATM_CHANDB1_ERR
1.111EVNT_ATM_CHANDB2_ERR
1.112EVNT_ATM_CHANDB3_ERR
1.113EVNT_ATM_CHANDB4_ERR
1.114EVNT_ATM_CHANDEL_ERR
1.115EVNT_ATM_CHANOVERSUB_ERR
1.116EVNT_ATM_CHAN_REMOVE
1.117EVNT_ATM_CHANSET_ERR
1.118EVNT_ATM_CHNDYNDB1_ERR
1.119EVNT_ATM_CHNDYNDB2_ERR
1.120EVNT_ATM_CHNDYNDB3_ERR
1.121EVNT_ATM_CHNDYNDB4_ERR
1.122EVNT_ATM_CHUNKMEM
1.123EVNT_ATM_CLRCCT_ERR
1.124EVNT_ATM_CLRRNGCCT_ERR
1.125EVNT_ATM_CMAPGET_ERR
1.126EVNT_ATM_COSCAMDECERR
1.127EVNT_ATM_COSCAMINCERR
1.128EVNT_ATM_CTCNTDB1
1.129EVNT_ATM_CTCNTDB2
1.130EVNT_ATM_CTCNTDB3
1.131EVNT_ATM_CTCNTDB4
1.132EVNT_ATM_CTXID_ERR
1.133EVNT_ATM_CTXNAMEGET_ERR
1.134EVNT_ATM_CTXPVCADD_ERR
1.135EVNT_ATM_CTXPVCDEL_ERR
1.136EVNT_ATM_CTXRNGADD_ERR
1.137EVNT_ATM_CTXRNGDEL_ERR
1.138EVNT_ATM_DB1_ERR
1.139EVNT_ATM_DBLOCK_ERR
1.140EVNT_ATM_DBUNLOCK_ERR
1.141EVNT_ATM_DESCDB1
1.142EVNT_ATM_DESCDB2
1.143EVNT_ATM_DESCDB3
1.144EVNT_ATM_DESCDB4
1.145EVNT_ATM_DLATMWFQ_ERR
1.146EVNT_ATM_DLCARD_ERR
1.147EVNT_ATM_DLCFGST_ERR
1.148EVNT_ATM_DNLD_CFG
1.149EVNT_ATM_DYNPROF_ERR
1.150EVNT_ATM_ENCAPCELL_ERR
1.151EVNT_ATM_ENDVCI_ERR
1.152EVNT_ATM_ENDVPI_ERR
1.153EVNT_ATM_EXTOP1_ERR
1.154EVNT_ATM_EXTOP2_ERR
1.155EVNT_ATM_EXTOP3_ERR
1.156EVNT_ATM_EXTOP_ERR
1.157EVNT_ATM_FLUSH_ERR2
1.158EVNT_ATM_GRIDRECOV_ERR
1.159EVNT_ATM_IDLE1_ERR
1.160EVNT_ATM_IDLE2_ERR
1.161EVNT_ATM_IDLE3_ERR
1.162EVNT_ATM_IDSPC_ERR
1.163EVNT_ATM_IFCCTDEL_ERR
1.164EVNT_ATM_IFGRIDGET_ERR
1.165EVNT_ATM_INIT3_ERR
1.166EVNT_ATM_INVALIDSAR_ERR
1.167EVNT_ATM_IPC1_ERR
1.168EVNT_ATM_IPC2_ERR
1.169EVNT_ATM_IPC3_ERR
1.170EVNT_ATM_IPC4_ERR
1.171EVNT_ATM_IPC5_ERR
1.172EVNT_ATM_IPC6_ERR
1.173EVNT_ATM_IPCGET_ERR
1.174EVNT_ATM_IPCNTDB1
1.175EVNT_ATM_IPCNTDB2
1.176EVNT_ATM_IPCNTDB3
1.177EVNT_ATM_IPCNTDB4
1.178EVNT_ATM_IPCNTINIT_ERR
1.179EVNT_ATM_IPCREPLY_ERR
1.180EVNT_ATM_IPCSEND_ERR
1.181EVNT_ATM_IPCSETEND_ERR
1.182EVNT_ATM_IPDYNDB1_ERR
1.183EVNT_ATM_IPDYNDB2_ERR
1.184EVNT_ATM_IPDYNDB3_ERR
1.185EVNT_ATM_IPDYNDB4_ERR
1.186EVNT_ATM_IPHOSTDB1_ERR
1.187EVNT_ATM_IPHOSTDB2_ERR
1.188EVNT_ATM_IPHOSTDB3_ERR
1.189EVNT_ATM_IPHOSTDB4_ERR
1.190EVNT_ATM_IPHOSTDB5_ERR
1.191EVNT_ATM_IPHREASIGNERR
1.192EVNT_ATM_IPHRESADD_ERR
1.193EVNT_ATM_IPHRESDEL_ERR
1.194EVNT_ATM_IPSHOTKEY_ERR
1.195EVNT_ATM_ITFGRID_ERR
1.196EVNT_ATM_ITFPVCCHG_ERR
1.197EVNT_ATM_ITFPVCDEL_ERR
1.198EVNT_ATM_ITFRNGCHG_ERR
1.199EVNT_ATM_ITFRNGDEL_ERR
1.200EVNT_ATM_L1AGGGET_ERR
1.201EVNT_ATM_L1CCGET_ERR
1.202EVNT_ATM_LGGET_ERR
1.203EVNT_ATM_MAIN
1.204EVNT_ATM_MAXBW
1.205EVNT_ATM_MAXCCTERR
1.206EVNT_ATM_MAXIPHOST
1.207EVNT_ATM_MAXOAM
1.208EVNT_ATM_MAXVCINCARDERR
1.209EVNT_ATM_MAXVCINVP_ERR
1.210EVNT_ATM_MAXVPINPORT_ERR
1.211EVNT_ATM_MBEGET_ERR
1.212EVNT_ATM_MEMALLOC_ERR
1.213EVNT_ATM_MK3COSQ_ERR
1.214EVNT_ATM_MK3PORTNUM_ERR
1.215EVNT_ATM_MK3VPNUM_ERR
1.216EVNT_ATM_MOCMD_ERR
1.217EVNT_ATM_OAMCNTCRT_ERR
1.218EVNT_ATM_OAMCNTDB1
1.219EVNT_ATM_OAMCNTDB2
1.220EVNT_ATM_OAMCNTDB3
1.221EVNT_ATM_OAMCNTDB4
1.222EVNT_ATM_OAMCNTDEC_ERR
1.223EVNT_ATM_OAMCNTDEL_ERR
1.224EVNT_ATM_OAMCNTINC_ERR
1.225EVNT_ATM_OAMCNTINIT_ERR
1.226EVNT_ATM_OAM_ERR
1.227EVNT_ATM_PING_POLL1
1.228EVNT_ATM_PING_POLL2
1.229EVNT_ATM_PING_START1
1.230EVNT_ATM_PING_START2
1.231EVNT_ATM_PING_START3
1.232EVNT_ATM_PING_STOP1
1.233EVNT_ATM_PING_STOP2
1.234EVNT_ATM_PORTNUM_ERR
1.235EVNT_ATM_PORTRESCNG_ERR
1.236EVNT_ATM_PORTRESCRT_ERR
1.237EVNT_ATM_PORTRESDEL_ERR
1.238EVNT_ATM_PORTSIZE_ERR
1.239EVNT_ATM_PORTTYPE_ERR
1.240EVNT_ATM_POUTGET_ERR
1.241EVNT_ATM_PROFCHG_ERR
1.242EVNT_ATM_PROFDB1_ERR
1.243EVNT_ATM_PROFDB2_ERR
1.244EVNT_ATM_PROFDB3_ERR
1.245EVNT_ATM_PROFDB4_ERR
1.246EVNT_ATM_PROFDB5_ERR
1.247EVNT_ATM_PROFDYNDB1_ERR
1.248EVNT_ATM_PROFDYNDB2_ERR
1.249EVNT_ATM_PROFDYNDB3_ERR
1.250EVNT_ATM_PROFDYNDB4_ERR
1.251EVNT_ATM_PROFDYNDB5_ERR
1.252EVNT_ATM_PROFGRIDADDERR
1.253EVNT_ATM_PROFGRIDDELERR
1.254EVNT_ATM_PROFWREDECCERR
1.255EVNT_ATM_PROFWREDINCERR
1.256EVNT_ATM_PROTCHK_ERR
1.257EVNT_ATM_PROTCNTGET_ERR
1.258EVNT_ATM_PROTDUP_ERR
1.259EVNT_ATM_PROT_ENCAP1_ERR
1.260EVNT_ATM_PROT_ENCAP2_ERR
1.261EVNT_ATM_PROTOGET_ERR
1.262EVNT_ATM_PROTOITFUB_ERR
1.263EVNT_ATM_PROTORESADDERR
1.264EVNT_ATM_PROTORESDECERR
1.265EVNT_ATM_PROTORESDEC_ERR
1.266EVNT_ATM_PROTORESINCERR
1.267EVNT_ATM_PRTATTRCNG_ERR
1.268EVNT_ATM_PUNCHOUT_ERR
1.269EVNT_ATM_PVCBIND_ERR
1.270EVNT_ATM_PVCBWCNTCRT_ERR
1.271EVNT_ATM_PVCBWCNTDEC_ERR
1.272EVNT_ATM_PVCBWCNTDEL_ERR
1.273EVNT_ATM_PVCBWCNTINC_ERR
1.274EVNT_ATM_PVCCARDCRT_ERR
1.275EVNT_ATM_PVC_CREATE
1.276EVNT_ATM_PVCDB1
1.277EVNT_ATM_PVCDB2
1.278EVNT_ATM_PVCDB3
1.279EVNT_ATM_PVCDB4
1.280EVNT_ATM_PVC_DEL
1.281EVNT_ATM_PVCDEL_ERR
1.282EVNT_ATM_PVCDESPDEL_ERR
1.283EVNT_ATM_PVCDYNDB1_ERR
1.284EVNT_ATM_PVCDYNDB2_ERR
1.285EVNT_ATM_PVCDYNDB3_ERR
1.286EVNT_ATM_PVCDYNDB4_ERR
1.287EVNT_ATM_PVCDYNFREE_ERR
1.288EVNT_ATM_PVCIPCNTCRT_ERR
1.289EVNT_ATM_PVCIPCNTDEC_ERR
1.290EVNT_ATM_PVCIPCNTDEL_ERR
1.291EVNT_ATM_PVCIPCNTINC_ERR
1.292EVNT_ATM_PVCKEYDB1ERR
1.293EVNT_ATM_PVCPORFCHG_ERR
1.294EVNT_ATM_PVCPORTCRT_ERR
1.295EVNT_ATM_PVCPOUTDECERR
1.296EVNT_ATM_PVCPOUTINCERR
1.297EVNT_ATM_PVC_PPA1_ERR
1.298EVNT_ATM_PVC_PPA2_ERR
1.299EVNT_ATM_PVC_PPA3_ERR
1.300EVNT_ATM_PVCPROFUPERR
1.301EVNT_ATM_PVCPRTPTCRTERR
1.302EVNT_ATM_PVCPRTPTDELERR
1.303EVNT_ATM_PVCRECSET_ERR
1.304EVNT_ATM_PVCRESADDERR
1.305EVNT_ATM_PVCRESADD_ERR
1.306EVNT_ATM_PVCRESCRT_ERR
1.307EVNT_ATM_PVCRESDEC_ERR
1.308EVNT_ATM_PVCRESDELERR
1.309EVNT_ATM_PVCRESDEL_ERR
1.310EVNT_ATM_PVCRESERR
1.311EVNT_ATM_PVCRESFREE_ERR
1.312EVNT_ATM_PVCRESINC_ERR
1.313EVNT_ATM_PVCRESRECRERR
1.314EVNT_ATM_PVCRSRECARDERR
1.315EVNT_ATM_PVCRSREITERR
1.316EVNT_ATM_PVCSET_ERR
1.317EVNT_ATM_PVC_UPDATE
1.318EVNT_ATM_PVCWREDUP_ERR
1.319EVNT_ATM_QOSBIND_ERR
1.320EVNT_ATM_QOSCCT_ERR
1.321EVNT_ATM_QOSCMAPGETERR
1.322EVNT_ATM_QOSCMAPREF1ERR
1.323EVNT_ATM_QOSCMAPREF2ERR
1.324EVNT_ATM_RDBDEL_ERR
1.325EVNT_ATM_RDBITER_ERR
1.326EVNT_ATM_RDBKEY_ERR
1.327EVNT_ATM_RECOVBIND_ERR
1.328EVNT_ATM_RECOVCHAN_ERR
1.329EVNT_ATM_RECOVDESC_ERR
1.330EVNT_ATM_RECOVDYN_ERR
1.331EVNT_ATM_RECOVERCMN_ERR
1.332EVNT_ATM_RECOVERCTL_ERR
1.333EVNT_ATM_RECOVERVP_ERR
1.334EVNT_ATM_RECOVIP_ERR
1.335EVNT_ATM_RECOVLIT_ERR
1.336EVNT_ATM_RECOVPROF_ERR
1.337EVNT_ATM_RECOVPVC_ERR
1.338EVNT_ATM_RECOVRNG_ERR
1.339EVNT_ATM_RESPROFCHGERR
1.340EVNT_ATM_RESPROFDELERR
1.341EVNT_ATM_RESWREDDELERR
1.342EVNT_ATM_RNGDB1_ERR
1.343EVNT_ATM_RNGDB2_ERR
1.344EVNT_ATM_RNGDB3_ERR
1.345EVNT_ATM_RNGDB4_ERR
1.346EVNT_ATM_RNGDB5_ERR
1.347EVNT_ATM_RNGDEL_ERR
1.348EVNT_ATM_RNGDYNDB1_ERR
1.349EVNT_ATM_RNGDYNDB2_ERR
1.350EVNT_ATM_RNGDYNDB3_ERR
1.351EVNT_ATM_RNGDYNDB4_ERR
1.352EVNT_ATM_RNG_PPA1_ERR
1.353EVNT_ATM_RNG_PPA2_ERR
1.354EVNT_ATM_RSDBINIT_ERR
1.355EVNT_ATM_SARCAM_DBERR1
1.356EVNT_ATM_SARCAM_DBERR2
1.357EVNT_ATM_SARCAM_DBERR3
1.358EVNT_ATM_SARCAM_DBERR4
1.359EVNT_ATM_SARCAMDECERR
1.360EVNT_ATM_SARCAMINCERR
1.361EVNT_ATM_SAR_DNLD
1.362EVNT_ATM_SARHWDB_ERR
1.363EVNT_ATM_SARIMGGET_ERR
1.364EVNT_ATM_SARPG_DBERR1
1.365EVNT_ATM_SARPG_DBERR2
1.366EVNT_ATM_SARPG_DBERR3
1.367EVNT_ATM_SARPG_DBERR4
1.368EVNT_ATM_SARPG_DBERR5
1.369EVNT_ATM_SARPOUTDECERR
1.370EVNT_ATM_SARPOUTINCERR
1.371EVNT_ATM_SARPROFCNGERR
1.372EVNT_ATM_SARQOSDECERR
1.373EVNT_ATM_SARQOSINCERR
1.374EVNT_ATM_SAR_REPLY
1.375EVNT_ATM_SARRESCRT_ERR
1.376EVNT_ATM_SARRESDEC_ERR
1.377EVNT_ATM_SARRESDEL_ERR
1.378EVNT_ATM_SARRESINC_ERR
1.379EVNT_ATM_SARRSRECARDERR
1.380EVNT_ATM_SARRSREITERR
1.381EVNT_ATM_SARSBDECERR
1.382EVNT_ATM_SARSBINCERR
1.383EVNT_ATM_SAR_SEND
1.384EVNT_ATM_SARWREDDECERR
1.385EVNT_ATM_SARWREDINCERR
1.386EVNT_ATM_SBCARDCRT_ERR
1.387EVNT_ATM_SBCARDDEL_ERR
1.388EVNT_ATM_SB_DBERR1
1.389EVNT_ATM_SB_DBERR2
1.390EVNT_ATM_SB_DBERR3
1.391EVNT_ATM_SB_DBERR4
1.392EVNT_ATM_SBLMT_ERR
1.393EVNT_ATM_SBPNHOUTDECERR
1.394EVNT_ATM_SBPNHOUTINCERR
1.395EVNT_ATM_SBREINTERR
1.396EVNT_ATM_SENDEOF_ERR
1.397EVNT_ATM_SHAP_ERR
1.398EVNT_ATM_SHAPTYPE1_ERR
1.399EVNT_ATM_SHAPTYPE2_ERR
1.400EVNT_ATM_SHAPTYPE3_ERR
1.401EVNT_ATM_SHAPTYPE4_ERR
1.402EVNT_ATM_SHAPTYPE5_ERR
1.403EVNT_ATM_SHAPTYPE6_ERR
1.404EVNT_ATM_SHAPTYPE7_ERR
1.405EVNT_ATM_SHOWCMD_ERR
1.406EVNT_ATM_SHOWCRIT_ERR
1.407EVNT_ATM_SOCKET_ERR
1.408EVNT_ATM_STARTENDVCI_ERR
1.409EVNT_ATM_STARTENDVPI_ERR
1.410EVNT_ATM_STARTVCI_ERR
1.411EVNT_ATM_STARTVPI_ERR
1.412EVNT_ATM_STATDYNDB1_ERR
1.413EVNT_ATM_STATDYNDB2_ERR
1.414EVNT_ATM_STATDYNDB3_ERR
1.415EVNT_ATM_STATDYNDB4_ERR
1.416EVNT_ATM_SW1_ERR
1.417EVNT_ATM_SW3_ERR
1.418EVNT_ATM_SW4_ERR
1.419EVNT_ATM_SW5_ERR
1.420EVNT_ATM_THREDCRTERR
1.421EVNT_ATM_UNBINDITF1_ERR
1.422EVNT_ATM_UNBINDITF2_ERR
1.423EVNT_ATM_UNBINDVLAN1_ERR
1.424EVNT_ATM_UNKNOWNBW_ERR
1.425EVNT_ATM_UNKNOWNMSG_ERR
1.426EVNT_ATM_UNKNOWNXC_ERR
1.427EVNT_ATM_VCCARDINIT_ERR
1.428EVNT_ATM_VCCRDCNTCRTERR
1.429EVNT_ATM_VCCRDCNTDECERR
1.430EVNT_ATM_VCCRDCNTDELERR
1.431EVNT_ATM_VCCRDCNTINCERR
1.432EVNT_ATM_VCINCARD_DBERR1
1.433EVNT_ATM_VCINCARD_DBERR2
1.434EVNT_ATM_VCINCARD_DBERR3
1.435EVNT_ATM_VCINCARD_DBERR4
1.436EVNT_ATM_VCINVPCRT_ERR
1.437EVNT_ATM_VCINVP_DBERR1
1.438EVNT_ATM_VCINVP_DBERR2
1.439EVNT_ATM_VCINVP_DBERR3
1.440EVNT_ATM_VCINVP_DBERR4
1.441EVNT_ATM_VCINVPDEC_ERR
1.442EVNT_ATM_VCINVPDEL_ERR
1.443EVNT_ATM_VCINVPINC_ERR
1.444EVNT_ATM_VCSAR_ERR
1.445EVNT_ATM_VCVPINIT_ERR
1.446EVNT_ATM_VPCCODDEL_ERR
1.447EVNT_ATM_VPDB1_ERR
1.448EVNT_ATM_VPDB2_ERR
1.449EVNT_ATM_VPDB3_ERR
1.450EVNT_ATM_VPDB4_ERR
1.451EVNT_ATM_VPDYNDB1_ERR
1.452EVNT_ATM_VPDYNDB2_ERR
1.453EVNT_ATM_VPDYNDB3_ERR
1.454EVNT_ATM_VPDYNDB4_ERR
1.455EVNT_ATM_VPINPORT_DBERR1
1.456EVNT_ATM_VPINPORT_DBERR2
1.457EVNT_ATM_VPINPORT_DBERR3
1.458EVNT_ATM_VPINPORT_DBERR4
1.459EVNT_ATM_VPPORTINIT_ERR
1.460EVNT_ATM_VPPRTCNTCRTERR
1.461EVNT_ATM_VPPRTCNTDECERR
1.462EVNT_ATM_VPPRTCNTDELERR
1.463EVNT_ATM_VPPRTCNTINCERR
1.464EVNT_ATM_VPRECSET_ERR
1.465EVNT_ATM_VPRESADD_ERR
1.466EVNT_ATM_VPRESCRT_ERR
1.467EVNT_ATM_VPRESDECERR
1.468EVNT_ATM_VPRESDEL_ERR
1.469EVNT_ATM_VPRESDEPROVERR
1.470EVNT_ATM_VPRESINCERR
1.471EVNT_ATM_VPRESPROV_ERR
1.472EVNT_ATM_VPRESRM_ERR
1.473EVNT_ATM_VPSHAP1_ERR
1.474EVNT_ATM_VPSHAP2_ERR
1.475EVNT_ATM_VPSHAP3_ERR
1.476EVNT_ATM_VPSHOW_ERR
1.477EVNT_ATM_VPVCDEL_ERR
1.478EVNT_ATM_VPVCSET_ERR
1.479EVNT_ATM_WREDCARDCRT_ERR
1.480EVNT_ATM_WREDCARDDEL_ERR
1.481EVNT_ATM_WREDCOSADDERR
1.482EVNT_ATM_WREDCOS_DBERR1
1.483EVNT_ATM_WREDCOS_DBERR2
1.484EVNT_ATM_WREDCOS_DBERR3
1.485EVNT_ATM_WREDCOS_DBERR4
1.486EVNT_ATM_WREDCOSFREE_ERR
1.487EVNT_ATM_WREDCRTERR
1.488EVNT_ATM_WRED_DBERR1
1.489EVNT_ATM_WRED_DBERR2
1.490EVNT_ATM_WRED_DBERR3
1.491EVNT_ATM_WRED_DBERR4
1.492EVNT_ATM_WREDDELERR
1.493EVNT_ATM_WREDDYNDB1_ERR
1.494EVNT_ATM_WREDDYNDB2_ERR
1.495EVNT_ATM_WREDDYNDB3_ERR
1.496EVNT_ATM_WREDDYNDB4_ERR
1.497EVNT_ATM_WREDFRADD_ERR
1.498EVNT_ATM_WREDFRDBERR1
1.499EVNT_ATM_WREDFRDBERR2
1.500EVNT_ATM_WREDFRDBERR3
1.501EVNT_ATM_WREDFRDBERR4
1.502EVNT_ATM_WREDFRDEL_ERR
1.503EVNT_ATM_WREDHW_ERR
1.504EVNT_ATM_WREDIVDNUM_ERR
1.505EVNT_ATM_WREDOAM_ERR
1.506EVNT_ATM_WREDPARAM
1.507EVNT_ATM_WREDPROFDBERR1
1.508EVNT_ATM_WREDPROFDBERR2
1.509EVNT_ATM_WREDPROFDBERR3
1.510EVNT_ATM_WREDPROFDBERR4
1.511EVNT_ATM_WREDREINTERR
1.512EVNT_ATM_WREDRESDEC_ERR
1.513EVNT_ATM_WREDRESINC_ERR
1.514EVNT_ATM_WREDRESRECRERR
1.515EVNT_ATM_WREDUPERR


1   Introduction

This document provides descriptions and recommended actions for ATM log messages in alphabetical UID order.

1.1   EVNT_ATM_AAA10_ERR

Message %s: error on processing author params for aaa_idx %d: %d rc: %d
Description ATMd failed to process the authorization parameters. In this case, CCOD activation stops normally, and the PVC returns to the dormant state.
Severity LOG_ERR
Action Log messages associated with this event were produced before it occurred. See the instructions about the event in the log.
Arg #1 current operation
Arg #2 aaa idx
Arg #3 error code

1.2   EVNT_ATM_AAA11_ERR

Message %s: error on creating protocol cct for %s rc: %d
Description ATMd failed to process the CCOD protocol. In this case, CCOD activation stops normally and returns to the dormant state.
Severity LOG_ERR
Action Log messages associated with this event were produced before it occurred. See the instructions about the event in the log.
Arg #1 current operation
Arg #2 pvc info
Arg #3 error code

1.3   EVNT_ATM_AAA12_ERR

Message %s: AAA Authorization status unknown, aaa_idx %d: %d
Description The ATMd process received a AAA authorization reply with an unknown status. This is an abnormal condition that stops the request and returns the PVC to the dormant state.
Severity LOG_EMERG
Action This message may be caused by an incompatible module upgrade. It requires investigation by customer support.

Run the show tech-support command. Save the command output and the log files and contact customer support.

Arg #1 ccod author
Arg #2 aaa index
Arg #3 status

1.4   EVNT_ATM_AAA1_ERR

Message %s: Failed to send AAA SESSION_DOWN, aaa_idx=%d
Description The ATM process failed to send a session-down request to AAA. This occurs only when the AAA process is down.
Severity LOG_ERR
Action The ATM process will retry sending the request when the AAA process is up.

Check the log messages for a AAA down message.

Enter the show process aaad command to determine the state of the AAA process.

If AAA is up, contact customer support for further investigation.

Arg #1 current operation
Arg #2 aaa idx
Replaces "Failed to send session down request to AAAd for cct_handle %s, aaa_idx=%d"

arg1: circuit handle

arg2: aaa idx

1.5   EVNT_ATM_AAA2_ERR

Message %s: Failed to send SESSION_UP, aaa_idx=%d.
Description ATMd failed to send a session-up request to AAA, probably because the AAA process is down. In this case, when AAA replies, the ATMd process sends the request again.
Severity LOG_ERR
Action Check the logs to see if AAA went down and restarted earlier.

Check the details of the AAA process for run-time seconds and the endpoint state.

If there was no sign that AAA was the cause, notify customer support for further investigation.

Arg #1 current operation
Arg #2 aaa idx

1.6   EVNT_ATM_AAA3_ERR

Message %s: Failed to send session down request to AAAd
Description This message is a follow up message for AAA authentication, which failed while sending a session-down message to AAA.
Severity LOG_ERR
Action A log message associated with this event was produced before it occurred. See the instructions about the event in the log.
Arg #1 current operation

1.7   EVNT_ATM_AAA4_ERR

Message %s: Subscriber authentication status unknown: %d, aaa_idx=%d.
Description The AAA process replied with an unknown type, which is an abnormal condition.
Severity LOG_ERR
Action The error may be caused by an incompatible module upgrade.

Save the log files and contact customer support for further investigation.

Arg #1 current operation
Arg #2 status
Arg #3 aaa idx
Replaces "Subscriber authentication status unknown: %d for %s, aaa_id=%d."

arg1: status

arg2: pvc info

arg3: aaa idx

1.8   EVNT_ATM_AAA5_ERR

Message %s: Failed to send session down request to AAAd, aaa_idx=%d
Description The ATMd process failed to send a SESSION_DOWN message to the AAA process, probably because the AAA process was down or insufficient message memory was available.
Severity LOG_ERR
Action When AAA is up again, ATMd resends the message.

Check the log messages prior to this event for messages about AAA failures. Also, check the log for AAA process details (run-time seconds and endpoint state).

If AAA shows no sign of failure, save the log files then notify customer support for further investigation.

Arg #1 current operation
Arg #2 aaa idx
Replaces "Failed to send session down request to AAAd for cct_handle %s, aaa_idx=%d"

arg1: circuit handle

arg2: aaa idx

1.9   EVNT_ATM_AAA6_ERR

Message %s: cannot find CCOD range from %s
Description The ATMd process received a AAA authorization reply, but the CCOD range was no longer there. This is probably a transient condition occurring after a CCOD range was removed.
Severity LOG_ERR
Action Verify whether the CCOD range is still provisioned. If the CCOD range exists, save the log files and contact customer support for further investigation.
Arg #1 current operation
Arg #2 pvc info

1.10   EVNT_ATM_AAA7_ERR

Message %s: Got unexpected AUTHOR_RESP for %s
Description The ATMd process received an unexpected authorization reply. This message probably occurred because a static PVC was created in an existing range or the AAA process was down.
Severity LOG_ERR
Action You can disregard this message if a static PVC was created in an existing range or the AAA process was down. To return a stuck PVC to the dormant state, enter the clear atm circuit command.
Arg #1 current operation
Arg #2 pvc info
Replaces "ATMd IPC: Got unexpected AUTHOR_RESP for %s."

arg1: pvc info

1.11   EVNT_ATM_AAA8_ERR

Message %s: error on ccod pvc resource allocation for %s, rc = %d
Description The ATMd process failed to validate a CCOD PVC resource after successfully authorizing the PVC. The PVC recovered normally by returning to the dormant state.
Severity LOG_ERR
Action To verify that the PVC has returned to the dormant state, enter the show atm pvc slot/port vpi vpi vci vci detail command.
Arg #1 current operation
Arg #2 pvc info
Arg #3 error code

1.12   EVNT_ATM_AAA9_ERR

Message %s: error on determining the validity of author resp received for %s
Description The ATMd process failed to process a AAA author reply.
Severity LOG_ERR
Action Log messages associated with this failure were produced before this event occurred. See the instructions about the event in the log.
Arg #1 current operation
Arg #2 pvc info

1.13   EVNT_ATM_AAA_AUTHOR1

Message aaa author: error on ccod pvc resource allocation for %s, rc = %d
Description The system failed to allocate CCOD resources for AAA-authorized circuits. This message occurred because there was insufficient memory to activate a dormant PVC or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech and show atm pvc slot/port all summary commands.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 range info
Arg #2 error code

1.14   EVNT_ATM_AAA_AUTHOR2

Message aaa author: error on retrieving dynamic profile %s, rc = %d
Description The system failed to find a dynamic profile record. This error is the same as the EVNT_ATM_PROFDYNDB5_ERR message, which occurred because there was insufficient memory to activate the CCOD PVC or the system detected corrupt database records.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and the log files.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 profile name
Arg #2 error code

1.15   EVNT_ATM_AAA_AUTHOR3

Message aaa author: Failed to find binding for %s
Description The system failed to obtain a protocol binding from the CCOD list. This message occurred because the binding is not set in the authentication server or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support and show process atm diag detail commands.

In the output, verify that the binding is configured on the SmartEdge router and registered in the authentication server.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 PVC info

1.16   EVNT_ATM_AAA_AUTHOR_ERR

Message %s: error on AAA authorization for %s, context id: %d aaa string: %s, rc = %#x
Description The system did not send a CCOD AAA authorization request.

This message occurred because the AAA process was down.

Severity LOG_ERR
Action The system recovers from this error automatically. Wait for the next CCOD activation to occur. If the PVC appears stuck, enter the clear atm circuit command.

If the PVC is still stuck, copy the log messages, and contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 context id
Arg #4 AAA author string
Arg #5 error code

1.17   EVNT_ATM_APS_CLEAR_CCT

Message clear circuit: error on deactivating circuit for %s
Description The system failed to clear an ATM APS circuit. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech and show process atm diag detail commands.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 PVC info

1.18   EVNT_ATM_APS_PROT1

Message aps protect port add: %s failed rc=%#x for slot=%d port=%d
Description The system failed to add an APS protect port. This message occurred because there was insufficient memory to add the protection port or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support and show process atm diag detail commands.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Arg #3 slot
Arg #4 port

1.19   EVNT_ATM_APS_PROT2

Message aps port remove: %s failed rc=%#x for slot=%d port=%d
Description The system failed to remove an APS protection port. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support and show process atm diag detail commands.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Arg #3 slot
Arg #4 port

1.20   EVNT_ATM_APSSWITCH_ERR

Message operation= %s Error processing APS swtich. rc=%#x
Description The system failed to update the specified circuit configuration. This message occurred because it failed to signal ISM about the circuit state change or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm pvc slot/port vpi vpi vci vci detail and show circuit atm detail summary commands.

Restart the ATM and ISM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s Error processing APS swtich. rc=%#x"

arg1: function name

arg2: error code

1.21   EVNT_ATM_ARTPKTLEN_ERR

Message Invalid ARP packet length exceed maximum %d
Description The ARP packet size is invalid.
Severity LOG_ERR
Action Collect the output of the show tech-support and show process atm diag detail commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 packet length

1.22   EVNT_ATM_ATM_FLUSH_ERR

Message %s: flush failed on %s rc=%#x
Description The ATMd process failed to forward a configuration request to the SARC. This message probably occurred because the SARC endpoint is down. Arg #1 shows the command that failed.
Severity LOG_ERR
Action Log messages associated with this event were produced before it occurred. See the instructions about the event in the log.

If the SARC endpoint was down, you can ignore the message, because the ATMd process recovers when the SARC is up again. If the log indicates an abnormal cause, such as a message length error, then save the log files and contact customer support for further investigation.

Arg #1 current operation
Arg #2 command type: start, end, pvc info
Arg #3 error code

1.23   EVNT_ATM_ATMWFQDB1_ERR

Message operation=%s Unable to insert atmwfq record 0x%016 %d for %s %d
Description The system failed to insert an ATMWFQ record. This message occurred because there was insufficient memory to insert the new record, or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands. Save the output of the commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 atmwfq grid
Arg #3 PVC info
Arg #4 error code

1.24   EVNT_ATM_ATMWFQDB2_ERR

Message operation=%s Unable to update atmwfq record 0x%016 %d for %s %d
Description The system failed to update an ATMWFQ record. This message occurred because there was insufficient memory to update the new record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands. Save the output of the commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 atmwfq grid
Arg #3 PVC info
Arg #4 error code

1.25   EVNT_ATM_ATMWFQDB3_ERR

Message operation=%s Unable to read atmwfq record 0x%016 %d for %s %d%s - Unable to read atmwfq record 0x%016for %s %d
Description The system failed to read an ATMWFQ record. This message occurred because the record does not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show memory, and show atm memory commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 atmwfq grid
Arg #3 PVC info
Arg #4 error code

1.26   EVNT_ATM_ATMWFQDB4_ERR

Message operation=%s Unable to remove atmwfq record 0x%016 %d for %s %d
Description The system failed to remove an ATMWFQ record. This message occurred because the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show memory, and show atm memory commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 atmwfq grid
Arg #3 PVC info
Arg #4 error code

1.27   EVNT_ATM_BE_ERR

Message operation=%s Failed to send request to BE rc = %d
Description The system failed to send the request to the backend process. This message occurred because the backend process was down or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s - BE operation failed for %s, rc = %#x"

arg1: function name

arg2: pvc info

arg3: error code

1.28   EVNT_ATM_BINDDB3_ERR

Message operation =%s Failed to get bind cfg record for %s from the database rc=%d
Description The system failed to read the binding record in the database. This message occurred if the binding record did not exist or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show bind atm detail and show atm pvc slot/port vpi vpi vci vci detail commands.

Restart the ATM and RCM processes.

Remove and reapply the binding for the PVC.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s cfg bind not found for %s rc=%d"

arg1: function name

arg2: pvc info

arg3: error code

1.29   EVNT_ATM_BINDITF1_ERR

Message operation=%s Can not bind interface %s to cct rc = %d
Description The system failed to apply an interface binding to a PVC. This message occurred because there was insufficient memory to add the interface or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands. Save the output of the commands.

Restart the RCM process.

If the problem persists, contact customer support or refer to the SmartEdge documentation for additional details

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "Can not bind interface %s to cct %s"

arg1: binding name

arg2: protocol circuit

1.30   EVNT_ATM_BINDITF2_ERR

Message operation=%s Can not register for ifmgr notifications for intf %s rc=%d
Description The system failed to register the interface with the Interface Manager. This message occurred because there was insufficient memory to register the interface or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support or see the SmartEdge documentation for more information.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "Can not register for ifmgr notifications for intf %s"

arg1: binding name

1.31   EVNT_ATM_BINDITF3_ERR

Message operation=%s Can not retrieve if attributes %s rc = %d
Description The system failed to obtain an interface attribute from the Interface Manager.

The message occurred because there was insufficient memory for the operation or the system detected a corrupt database record.

Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "Can not retreive if attributes %s"

arg1: binding name

1.32   EVNT_ATM_BINDUPDATE_ERR

Message operation=%s failed to update binding for cct for %s rc = %d
Description The system failed to update binding information for the PVC circuit. This message occurred because the binding information was incorrect or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands. Save the output of the commands.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - failed to update binding for cct %s"

arg1: function name

arg2: circuit

1.33   EVNT_ATM_BINDVLAN1_ERR

Message operation=%s Can not bind vlan %s to cct rc = %d
Description The system failed to bind a VLAN to a PVC.

The message occurred because of insufficient memory or because the system detected a corrupt database record.

Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands. Save the output of the commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 vlan name
Arg #3 error code

1.34   EVNT_ATM_BLKPROFDEL_ERR

Message operation=%s failed to delete profile 0x%x in Statd rc = %d
Description The system failed to remove a profile grid from the database.

The message occurred because the system detected corrupt database records.

Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands. Save the output of the commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 profile grid
Arg #3 error code
Replaces "blkst_delete_profile() failed with error %d"

arg1: error code

1.35   EVNT_ATM_BWCNTDB1

Message operation='%s' Failed to insert bandwidth count record %s into database rc =0x%x
Description The system failed to insert a bandwidth count record into the database. This message occurred because there was insufficient memory to insert the record or the system detected corrupt database records.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands. Save the output of the commands.

Restart the RCM process.

The bandwidth count record is created during port configuration. Removing and reconfiguring the port may resolve the problem (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 port info
Arg #3 the error code returned from database

1.36   EVNT_ATM_BWCNTDB2

Message operation = %s Failed to update bandwidth record %s in database rc=0x%x
Description The system failed to update a bandwidth count record in the database. This message occurred because there was insufficient memory to update the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands. Save the output of the commands.

Restart the RCM process.

The bandwidth count record is created during port configuration. Removing and reconfiguring the port may resolve the problem (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 port info
Arg #3 the error code returned from database
Replaces "%s fail to update bandwidth record rc: %d"

arg1: function name

arg2: error code

1.37   EVNT_ATM_BWCNTDB3

Message operation = %s Failed to read bandwidth record %s from database rc=0x%x
Description The system failed to read a bandwidth count record in the database. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Verify that the record was created by entering the show config atm and show port slot/port detail commands.

If the record does not exist, try again to create the record.

Otherwise, restart the RCM process.

The circuit bandwidth record is created during port configuration. Removing and reconfiguring the card may resolve the issue (this action disrupts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 slot info
Arg #3 the error code returned from database
Replaces "%s fail to read bandwidth count record, rc: %d"

arg1: function name

arg2: error code

1.38   EVNT_ATM_BWCNTDB4

Message operation=%s Failed to remove bandwidth record %s in database rc=0x%x
Description The system failed to remove a bandwidth count record from the database. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Verify that the record was created by entering the show config atm and show port slot/port detail commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 port info
Arg #3 the error code returned from database

1.39   EVNT_ATM_BWCNTINIT_ERR

Message operation=%s failed to re-init bandwidth count rc: %d process: %d
Description The system failed to initialize the bandwidth count when it was booting or after a process was restarted. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Removing and reconfiguring the port may resolve the issue (this action affects service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to re-init bandwidth count rc: %d"

arg1: function name

arg2: error code

1.40   EVNT_ATM_CAMALLOC_ERR

Message operation=%s Allocate entry failed for %s - rc = %d
Description The system failed to allocate a CAM entry. This message occurred because the CAM entry was already reserved or there were no more CAM entries available.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm and show atm resource cam slot/port command.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code returned from database
Replaces "%s - Allocate entry failed for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.41   EVNT_ATM_CAMCARDCRT_ERR

Message operation=%s Cannot create SAR CAM resources for %s - %d
Description The system failed to create a CAM resource record when configuring an ATM card. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Removing and reconfiguring the card may resolve the problem (this action affects service). If the problem persists, contact customer support.
Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Cannot create SAR CAM resources for %s - %d"

arg1: function name

arg2: slot info

arg3: error code

1.42   EVNT_ATM_CAMCARDDEL_ERR

Message operation=%s Cannot delete SAR CAM resources for %s - %d
Description The system failed to create a WRED resource record when configuring an ATM card. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Removing and reconfiguring the card may resolve the problem (this action affects service). If the problem persists, contact customer support.
Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Cannot delete SAR CAM resources for %s - %d"

arg1: function name

arg2: pvc info

arg3: error code

1.43   EVNT_ATM_CAMCOSADD_ERR

Message operation=%s CAM record alloc cosq failed for %s %d- rc = %d
Description The system failed to allocate a CAM entry for CoS queues. This message occurred because the system failed to read or update the CAM record.
Severity LOG_ERR
Action See instructions in the following related messages:

If it failed to read the CAM record, see EVNT_ATM_SARCAM_DBERR3 or if it failed to update it, see EVNT_ATM_SARCAM_DBERR2.

Check for low memory conditions by entering the show config atm and show atm resource cam slot/port commands. Save the output of the commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 sarc index
Arg #4 error code returned from database
Replaces "%s - CAM record alloc cosq failed for %s %d - %d"

arg1: function name

arg2: pvc info

arg3: sar idx

arg4: error code

1.44   EVNT_ATM_CAMCOSLMT_ERR

Message operation=%s CAM resources limit reached for %s sarc: %d configured %d request %d max: %d
Description The system failed to allocate more CAM entries. The message occurred because the CAM allocation has reached the maximum limit or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm and show atm resource cam slot/port commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 sarc index
Arg #4 current cosq count
Arg #5 request cosq count
Arg #6 maximum cosq allowed
Replaces "%s - CAM resources limit reached for %s %d configured %d request %d",

arg1: function name

arg2: pvc info

arg3: sar idx

arg4: total queues

arg5: number of queues

1.45   EVNT_ATM_CAMCOSRM_ERR

Message operation=%s CAM record free cosq failed for %s %d- rc = %d
Description The system failed to free a CAM entry for CoS queues. This message occurred because the system failed to read or update the CAM record.
Severity LOG_ERR
Action See the instructions in the following related messages:

If it failed to read the CAM record, see EVNT_ATM_SARCAM_DBERR3 or if it failed to update the CAM record, see EVNT_ATM_SARCAM_DBERR2.

Check for low memory conditions by entering the show config atm and show atm resource cam slot/port commands. Save the output of the commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 sarc index
Arg #4 error code returned from database
Replaces "%s - CAM record free cosq failed for %s %d - %d"

arg1: function name

arg2: pvc info

arg3: sar idx

arg4: error code

1.46   EVNT_ATM_CAM_ENTRY_ERR

Message operation=%s CAM allocation already reserved %d
Description The system failed to allocate the current CAM entry for the specified PVC because

it had already been reserved.

Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm and show atm resource cam slot/port commands. Save the output of the commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 the entry number
Replaces "%s - CAM allocation already reserved %d"

arg1: function name

arg2: entry number

1.47   EVNT_ATM_CAM_IDX_ERR

Message operation=%s Used index exceeded %d
Description The system failed to allocate the current CAM entry for the specified PVC because

CAM allocation reached the maximum limit.

Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm and show atm resource cam slot/port commands. Save the output of the commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 maximum allowed
Replaces "%s - Used index exceeded"

arg1: function name

1.48   EVNT_ATM_CAMPGUPDATE_ERR

Message operation=%s CAM page record update failed for %s %d- rc = %d
Description The system failed to update a CAM page record. This message occurred because the system failed to delete or update a CAM page record in the database.
Severity LOG_ERR
Action See the instructions in the following related messages:

If it failed to delete a CAM page record, see EVNT_ATM_SARPG_DBERR5 or if it failed to update the record, see EVNT_ATM_SARPG_DBERR2.

Check for low memory conditions by entering the show memory, show process atm, show config atm, and show atm resource cam slot/port commands. Save the output of the commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 sarc idx
Arg #4 error code returned from database
Replaces "%s - CAM page record update failed for %s %d - %d"

arg1: function name

arg2: pvc info

arg3: sar idx

arg4: error code

1.49   EVNT_ATM_CAMREINTERR

Message operation=%s - Cannot re-initialize SAR CAM resources - %d process: %d
Description The system failed to initialize CAM entry after reloading a card or restarting a process.

The message occurred because the system detected a corrupt database record.

Severity LOG_ERR
Action Removing and recreating the ATM card configuration may resolve the issue (this action impacts service).

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 process ID
Replaces "%s - Cannot re-initialize SAR CAM resources - %d"

arg1: function name

arg2: error code

1.50   EVNT_ATM_CARDCRT_ERR

Message operation=%s Card delete failed for %s rc = %d%s Card delete failed for %s
Description The system failed to delete the ATM card. The message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show configuration, show memory, and show atm memory commands and save it.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 Slot info
Arg #3 error code

1.51   EVNT_ATM_CARDDB3_ERR

Message operation =%s Unable to read card record for %s rc=%d
Description The system failed to read the card record in the database. This message occurred if the card record did not exist or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, and show hardware card slot detail commands.

Restart the ATM and RCM processes.

Reload the card (this action impacts service).

Remove and reconfigure the card (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - Unable to read card record for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.52   EVNT_ATM_CARDDEL_ERR

Message operation=%s Card delete failed for %s rc = %d
Description The system failed to delete the ATM card. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Collect the output of the show configuration, show memory, and show atm memory commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current info
Arg #2 slot info
Arg #3 error code
Replaces "%s Card delete failed for %s"

arg1: function name

arg2: pvc info

1.53   EVNT_ATM_CARDSARIMG_ERR

Message operation='%s' unknown card type with sar image: %d for %s
Description The SAR image was not supported for the card.
Severity LOG_ERR
Action Check the memory usage by entering the show config atm and show config port commands. Save the output of the commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 card type
Arg #3 sar image type
Arg #4 pvc info
Replaces "%s - invalid card type for scoreboard check %d image %d"

arg1: function name

arg2: card type

arg3: sar image type

1.54   EVNT_ATM_CARDTYPE_ERR

Message operation=%s INVALID card_type %d
Description The specified card type is not supported.
Severity LOG_ERR
Action Verify the card type by entering the show config atm, show hardware card slot, and show port slot/port detail commands. Save the output of the commands.

Insert a card of supported type.

If the card is of a supported type, restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 card type
Replaces "%s: INVALID port number %d for card_type %d"

arg1: function name

arg2: port type

arg3: card type

1.55   EVNT_ATM_CCCT_ALLOC_ERR

Message %s: Unable to allocate cct handle for CCOD PVC %s.
Description The system failed to allocate a circuit for a newly activated CCOD PVC.

This message occurred because the ATM circuit pool was exhausted.

Severity LOG_ERR
Action This may be a sign of a circuit leak, because ATM has more circuits available than can be configured.

Save the output of the show atm pvc summary all command.

Save the configuration file.

Restart the ATM process.

Notify customer support of the problem.

Arg #1 current operation
Arg #2 pvc info
Replaces "atm_ccod_handle_activity - Unable to allocate cct handle for CCOD PVC %s."

"atm_ccod_rcm_create_pvc_one - unable to allocate cct handle for %s."

arg1: pvc info

1.56   EVNT_ATM_CCOD_AAA1_ERR

Message %s: iterate dyn pvc failed, rc=%d
Description ATMd failed to clean up all pending authorization processes when AAA was down.
Severity LOG_ERR
Action Log messages associated with this resource type were produced before this event occurred. See the instructions about the event in the log, including the PVC that failed to be cleaned up.
Arg #1 current operation
Arg #2 error code

1.57   EVNT_ATM_CCOD_AAA2_ERR

Message %s: error on cct update
Description The system failed to update CCOD PVCs after an ATMd restart or a reload with switchover.

The root cause is identified in other log messages about the PVCs failing.

Severity LOG_ERR
Action See the instructions about recovering from the PVC failure in the log messages.

If a large number of PVCs failed, enter the process restart atm command to recover quickly.

Arg #1 current operation

1.58   EVNT_ATM_CCOD_ACT1_ERR

Message %s: activity detected unexpectedly on for %s.
Description A stale PVC was found during CCOD activation.
Severity LOG_ERR
Action Verify that the stale PVC exists by entering the show atm pvc all summary and show circuit summary commands.

Enter the clear atm circuit command.

If the stale PVC still exists, copy the log and contact customer support.

Arg #1 current operation
Arg #2 pvc info
Replaces "atm_ccod_handle_activity - Activity detected on %s that is already created."

arg1: pvc info

1.59   EVNT_ATM_CCOD_ACT2_ERR

Message %s: activity detected on %s that is already created.
Description A working PVC was found during CCOD activation.
Severity LOG_EMERG
Action Verify the state of the PVC and the circuit associated it by entering the show atm pvc slot/port vpi vpi vci vci detail command.

If the PVC is stuck, enter the clear atm circuit command to bring it back to dormant. Then wait for the client side to re-trigger CCOD activation.

Arg #1 current operation
Arg #2 pvc info
Replaces "atm_ccod_handle_activity - Activity detected on %s that is already created."

arg1: pvc info

1.60   EVNT_ATM_CCOD_ACT3_ERR

Message %s: error on on-demand pvc resource allocation for %s, rc = %d
Description The system failed to validate a resource on a new CCOD-activated PVC.

The CCOD activation will abort normally and return to dormant state.

Severity LOG_ERR
Action See the log message about the Resource Module to identify the cause of the failure.
Arg #1 current operation
Arg #2 pvc info
Arg #3 error code

1.61   EVNT_ATM_CCOD_ACT6_ERR

Message %s: Cannot create %s because %s has no binding
Description A PVC binding was missing during the CCOD activation.

This failure is abnormal and the PVC is kept in that state.

Severity LOG_ERR
Action Retrieve the PVC and range record by entering the show atm pvc slot/port vpi vpi vci vci command. Save the output and the log messages and contact customer support.

If the CCOD range is valid, you can reset the PVC back to dormant with the clear atm circuit command.

Arg #1 current operation
Arg #2 pvc info
Arg #3 range info
Replaces "atm_ccod_handle_activity - Cannot create %s because %s has no binding"

arg1: pvc info

arg2: range info

1.62   EVNT_ATM_CCOD_INIT1_ERR

Message %s: Unable to initialize ccth library.
Description CCOD module initialization failed causing the ATMd process to fail.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and log files and contact customer support.
Arg #1 current operation
Replaces "Unable to initialize ccth library."

1.63   EVNT_ATM_CCOD_INIT2_ERR

Message %s: Unable to initialize ftimer library.
Description CCOD module initialization failed causing the ATMd process to fail.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and log files and contact customer support.
Arg #1 current operation
Replaces "Unable to initialize ftimer library"

1.64   EVNT_ATM_CCODMODE_ERR

Message operation=%s cannot obtain CCOD mode for %s rc = %d
Description The system failed to obtain the CCOD mode from the card manager. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Collect the output of the show config and show port slot/port detail commands. Save the output of the commands and the log messages.

Removing and reconfiguring the port may resolve the problem (this action impacts service).

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - cannot obtain CCOD mode for %d/%d"

arg1: function name

arg2: slot

arg3: port

1.65   EVNT_ATM_CCOD_PROTO1_ERR

Message %s: cfg bind not found for %s, type: %s, rc: %d
Description The PVC binding information was not found during CCOD activation.

This failure may occur when a PVC binding is removed. It aborts normally and returns the PVC to the dormant state.

Severity LOG_ERR
Action Verify the range and binding records by entering the show circuit slot/port atm detail command. Save the output.

If the condition is valid, there is no action because the PVC activation was aborted normally.

If the condition is invalid, gather the command output and log files and contact customer support for further investigation.

Arg #1 current operation
Arg #2 pvc info
Arg #3 encaps name

1.66   EVNT_ATM_CCODRESADDERR

Message operation=%s Resource allocation failed for CCOD %s rc = %d
Description The system failed to allocate CCOD resources.

This message occurred because there were insufficient CCOD resources available to add the CCOD range or the system detected a corrupt database record.

Severity LOG_ERR
Action Enter the show configuration, show memory, and show atm memory commands and save the output and log messages about the event.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 CCOD info
Arg #3 error code
Replaces "%s failed to allocate CCOD resource for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.67   EVNT_ATM_CCODRESDEC_ERR

Message operation=%s failed to free ccod resources for %s rc = %d
Description The system failed to decrement CCOD resources when removing CCOD PVCs.
Severity LOG_ERR
Action Log messages associated with this resource type were produced before this event occurred. See the instructions about the event in the log.

Otherwise, restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code

1.68   EVNT_ATM_CCODRESDELERR

Message operation=%s Resource delete failed for CCOD %s rc = %d
Description The system failed to delete CCOD resources.

The message occurred because the system detected corrupt database records.

Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, run the show tech-support and show history global commands, save the output, and contact customer support.

Arg #1 current operation
Arg #2 Range info
Arg #3 error code
Replaces "%s failed to free range resource rc %d"

arg1: function name

arg2: error code

1.69   EVNT_ATM_CCODRESINC_ERR

Message operation=%s failed to allocate ccod resources for %s rc = %d
Description The system failed to increment CCOD resources when creating CCOD PVCs.
Severity LOG_ERR
Action Log messages associated with this resource type were produced before this event occurred. See the instructions about the event in the log.

Otherwise, restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s failed to allocate ccod resources for protect_port"

arg1: function name

1.70   EVNT_ATM_CCTCNTCRT_ERR

Message operation=%s failed to create cct_in_slot resources for %s rc %d
Description The system failed to create a cct_in_slot (circuits per slot) count record when creating an ATM card. This message occurred because you inserted a card of invalid type or the system detected a corrupt database record.
Severity LOG_ERR
Action Log messages associated with this resource type were produced before this event occurred. See the instructions about the event in the log.

Otherwise, restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to create cct_in_slot resources for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.71   EVNT_ATM_CCTCNTDEL_ERR

Message operation=%s failed to delete cct_in_slot resources for %s rc %d
Description The system failed to delete a cct_in_slot (circuits per slot) count record when removing an ATM card from configuration. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to delete cct_in_slot resources for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.72   EVNT_ATM_CCTCNTINIT_ERR

Message operation=%s failed to re-init cct_in_slot count rc: %d process: %d
Description The system failed to initialize the circuit count when it was booting or after a process was restarted. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Removing and reconfiguring the card may resolve the problem (this action affects service). If the problem persists, contact customer support.
Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to re-init cct_in_slot count rc: %d"

arg1: function name

arg2: error code

1.73   EVNT_ATM_CCT_CREATE

Message %s: cct create failure for %s, rc=%#x
Description The ATMd process failed to create a CCOD circuit due to one of the following scenarios:

1) aaa author - authorization was aborted normally

2) ccod act - CCOD activation was aborted normally

3) punchout - the original PVC might be in a corrupt state

4) MO re-create PVC - the cleanup may not be complete

5) pvc create - the PVC was aborted normally

Severity LOG_ERR
Action Log messages associated with this failure were produced before the event occurred. See the instructions about the event in the log.

Restart the ATM process to resynchronize the circuit information with the actual PVC state.

Arg #1 current operation
Arg #2 pvc info
Arg #3 return code

1.74   EVNT_ATM_CCTCRT_ERR

Message operation=%s failed to create cct %s in ISM rc = %d
Description The Interface Manager failed to create a circuit for the PVC. The message occurred because there was insufficient memory to create the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands. Save the output and any log messages about the event.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "failed to create cct %s in ISM",

arg1: pvc info

1.75   EVNT_ATM_CCTDB1

Message operation=%s Failed to insert CCT record into the database rc =%d
Description The system failed to insert the circuit record into the database.

This message occurred because there was insufficient memory to add the record or the system detected corrupt database records. See also EVENT_ATM_CCTDYNDB1.

Severity LOG_ERR
Action Collect the output of the show tech-support, show memory, and show atm memory commands.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code

1.76   EVNT_ATM_CCTDB2

Message operation=%s Failed to update CCT record in the database rc=%d
Description The system failed to update the circuit record in the database. This message occurred because there was insufficient memory to update the record or the system detected corrupt database records. See also EVENT_ATM_CCTDYNDB2.
Severity LOG_ERR
Action Collect the output of the show tech-support, show memory, and show atm memory commands.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code

1.77   EVNT_ATM_CCTDB3

Message operation = %s Failed to read CCT record from the database rc=%d
Description The system failed to read the circuit record from the database. This message occurred because the record did not exist or the system detected corrupt database records. See also EVENT_ATM_CCTDYNDB3.
Severity LOG_ERR
Action Collect the output of the show tech-support and show atm pvc slot port vpi vci detail commands.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code

1.78   EVNT_ATM_CCTDB4

Message operation=%s Failed to remove CCT record in the database rc=%d
Description The system failed to remove the circuit record from the database. This message occurred if the record did not exist or the system detected corrupt database records. Also see EVENT_ATM_CCTDYNDB4.
Severity LOG_ERR
Action Collect the output of the show tech-support and show atm pvc detail commands.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code

1.79   EVNT_ATM_CCTDEREF_ERR

Message operation =%s Failed to dereference cct for %s rc=%d
Description The system failed to remove a PVC reference to a specific circuit. The message occurred because the circuit record did not exist, the PVC is referencing an invalid circuit, or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm pvc slot/port vpi vpi vci vci detail and show atm pvc detail commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - Error in cct remove for %s, rc = %d"

arg1: function name

arg2: pvc info

arg3: error code

1.80   EVNT_ATM_CCTDYNDB1_ERR

Message operation =%s Failed to insert dynamic circuit record for %s in the database rc=%d
Description The system failed to insert a dynamic circuit record into the database. This message occurred because there was insufficient memory to insert the record or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm memory and show atm pvc detail commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s dyn cct insert failed rc=%#x, for %s"

arg1: function name

arg2: error code

arg3: pvc info

1.81   EVNT_ATM_CCTDYNDB2_ERR

Message operation =%s Failed to update dynamic circuit record for %s in the database rc=%d
Description The system failed to update the dynamic circuit record in the database. This message occurred because there was insufficient memory to update the record or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm memory and show atm pvc detail commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s dyn cct update failed rc=%#x"

arg1: function name

arg2: error code

1.82   EVNT_ATM_CCTDYNDB3_ERR

Message operation =%s Failed to get dynamic circuit record for %s in the database rc=%d
Description The system failed to obtain a dynamic circuit record from the database. This message occurred if the record did not exist or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm memory, and show atm pvc detail commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - cct dyn not found, rc = %d"

arg1: function name

arg2: error code

1.83   EVNT_ATM_CCTDYNDB4_ERR

Message operation =%s Failed to remove dynamic circuit record for %s in the database rc=%d
Description The system failed to remove a dynamic circuit record from the database. This message occurred if the record did not exist or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm memory, and show atm pvc detail commands.

Restart the ATM and RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code

1.84   EVNT_ATM_CCT_EVT10_ERR

Message %s: Failure IPC:%d looking up the ISM Endpoint
Description The ATMd process failed to set the ATM-ISM client endpoint. This failure impacts ATMd normal operation. The system restarts ATM automatically, but if there are repeated failures, the ATMd process is shut down.
Severity LOG_ERR
Action Examine the log messages associated with this event to determine whether there were repeated ATMd failures. If not, you can disregard this message. If so, save the log files and contact customer support.
Arg #1 current operation
Arg #2 error code

1.85   EVNT_ATM_CCT_EVT11_ERR

Message %s: Failed to register as Media client with ISM due to IPC error - rc %d
Description The ATMd process failed to set the ATM-ISM client endpoint. This failure impacts ATMd normal operation.
Severity LOG_ERR
Action Restart the ATMd process.

If the problem persists, contact customer support for further investigation.

Arg #1 current operation
Arg #2 error code

1.86   EVNT_ATM_CCT_EVT12_ERR

Message %s: Failed to register as Media client with ISM (ISM error %d)
Description The ATMd process failed to set the ATM-ISM client endpoint. This failure impacts ATMd normal operation.
Severity LOG_ERR
Action Restart the ATMd process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code

1.87   EVNT_ATM_CCT_EVT13_ERR

Message %s: pack_buf alloc failed
Description The ATMd process failed to allocate an event buffer and the event was dropped. This failure was probably caused by back pressure from the ISM endpoint. See Arg #1 for the event that was dropped.
Severity LOG_ERR
Action Check the CPU usage by the ISM and ATM processes by entering the show process cpu command. Save the command output and the log files and contact customer support for further investigation.
Arg #1 current operation

1.88   EVNT_ATM_CCT_EVT14_ERR

Message %s Traffic attributes set failed %d"
Description The ATMd process failed to set attributes for a CCT_ATMCFG event and the event was dropped. This failure can cause the circuit to be partially configured and subscriber sessions using the circuit to fail.
Severity LOG_ERR
Action Collect information about the PVC state by entering the show atm pvc command with identifying data from the log message (such as slot/port vpi and vci). Save the output and contact customer support for further investigation.

If the PVC is stuck, re-create the PVC or restart the ATMd process to clear the inconsistency.

Arg #1 current operation
Arg #2 error code

1.89   EVNT_ATM_CCT_EVT15_ERR

Message %s: CLP attributes set failed %d
Description The ATMd process failed to set the CLP value in the CCT_ATMCFG event. This minor error may affect subscriber service.
Severity LOG_ERR
Action Verify the PVC state by entering the show atm pvc command with identifying details (such as slot/port vpi vci) from the log message. Save the command output and the log files.

If the missing CLP value is a concern, restart the ATMd process to resynchronize the circuit information with the actual PVC state.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code

1.90   EVNT_ATM_CCT_EVT1_ERR

Message %s: Failed to alloc ISM event msg req_id=%#x, id=%#x, type=%#x
Description The ATMd process failed to allocate an ISM event buffer and the event was lost. This is an internal abnormal condition that requires investigation.
Severity LOG_ERR
Action Check the system and ATMd memory usage by entering the show memory, and show atm memory commands. Save the command output and the log files.

If ATM memory usage is high (that is, if there is a memory leak), then restart the ATMd process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 request id
Arg #3 event type
Arg #4 event sub type

1.91   EVNT_ATM_CCT_EVT2_ERR

Message %s: Can't insert/update boot_version %d
Description The ATMd process failed to update an internal boot version. This failure does not impact ATMd normal operation.
Severity LOG_ERR
Action Contact customer support for further investigation.
Arg #1 current operation

1.92   EVNT_ATM_CCT_EVT3_ERR

Message %s: pseudo slot not accepted
Description The ATMd internal boot version had an invalid slot value. This failure does not impact ATMd normal operation.
Severity LOG_ERR
Action Contact customer support for further investigation.
Arg #1 current operation

1.93   EVNT_ATM_CCT_EVT4_ERR

Message %s: Can't read the boot_version rc=%d
Description The ATMd process failed to read the boot version. This failure does not impact ATMd normal operation.
Severity LOG_ERR
Action Contact customer support for further investigation.
Arg #1 current operation
Arg #2 error code

1.94   EVNT_ATM_CCT_EVT5_ERR

Message %s: Can't update boot_version rc=%d
Description The ATMd process failed to update the boot version. This failure does not impact ATMd normal operation.
Severity LOG_ERR
Action Contact customer support for further investigation.
Arg #1 current operation
Arg #2 error code

1.95   EVNT_ATM_CCT_EVT6_ERR

Message %s: can't get boot_version
Description The system gave ATMd an invalid slot for obtaining the boot version. This is an internal abnormal condition that should be investigated.
Severity LOG_ERR
Action Contact customer support for further investigation.
Arg #1 current operation

1.96   EVNT_ATM_CCT_EVT7_ERR

Message %s: event insert failed
Description The ATMd process failed to insert a new event when signaling an internal event. This is an abnormal condition that can cause lost events.
Severity LOG_ERR
Action Restart the ATMd process.

If the problem persists, contact customer support for further investigation.

Arg #1 current operation

1.97   EVNT_ATM_CCT_EVT8_ERR

Message %s: Failure IPC:%d setting the IPC port for the ISM send thread
Description The ATMd process failed to set the ATM-ISM client endpoint. This failure impacts ATMd normal operation.
Severity LOG_ERR
Action Restart the ATMd process.

If the problem persists, contact customer support for further investigation.

Arg #1 current operation
Arg #2 error code

1.98   EVNT_ATM_CCT_EVT9_ERR

Message %s: Failure IPC:%d looking up the ISM MBE Endpoint
Description The ATMd process failed to set the ATM-ISM client endpoint. This failure impacts ATMd normal operation.
Severity LOG_ERR
Action Restart the ATMd process.

If the problem persists, contact customer support for further investigation.

Arg #1 current operation
Arg #2 error code

1.99   EVNT_ATM_CCTHALLOC_ERR

Message operation=%s failed to allocate cct handle for cct %s rc = %d
Description The system failed to allocate a circuit address for the PVC. This message occurred because all circuit addresses are in use or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands. Save the output of the commands and any log messages about the event.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "failed to allocate cct handle for cct %s"

arg1: circuit

1.100   EVNT_ATM_CCTOPCFG_ERR

Message operation= %s error on cct op cfg, rc = %d
Description The system failed to update circuit configuration. The message occurred because the system failed to send ISM the circuit change information or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm pvc slot/port vpi vpi vci vci detail, and show circuit atm commands.

Restart the ATM and ISM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code

1.101   EVNT_ATM_CCTPARTCFGERR

Message operation =%s error on partial cct cfg, rc = %d
Description The system failed to send a PVC partial configuration to ISM. This message occurred because the ISM process was not available or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm pvc slot/port vpi vpi vci vci detail and show circuit atm commands.

Restart the ATM and ISM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s - error on cct cfg, rc = %d"

arg1: function name

arg2: error code

1.102   EVNT_ATM_CCTPROFUP_ERR

Message operation =%s error on cct profile replace for vpi: %d, vci: %d rc=%#x
Description The system failed to apply a profile attribute to a circuit. This message occurred because there was insufficient memory to apply the new attribute or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm pvc slot/port vpi vpi vci vci detail and show atm profile profile name detail commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 VPI value
Arg #3 VCI value
Arg #4 error code
Replaces "%s error on cct profile replace for vpi: %d, vci: %d"

arg1: function name

arg2: vpi

arg3: vci

1.103   EVNT_ATM_CCT_PROTO1

Message %s: cct proto create failure for %s, rc=%#x
Description The system failed to create a circuit record for a PVC protocol. This message occurred because insufficient memory was allocated to the new circuit or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show memory, and show atm resources count slot commands.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - proto cct create failed for %s, rc = %d"

arg1: function name

arg2: pvc info

arg3: error code

1.104   EVNT_ATM_CCT_PROTO2

Message %s: cct proto update failure for %s rc=%#x
Description The system failed to update a circuit record for the PVC protocol. This message occurred because there was insufficient memory to allocate the new circuit or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show memory, and show atm resources count slot commands.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - proto cct update failed for %s, rc = %d"

arg1: function name

arg2: pvc info

arg3: error code

1.105   EVNT_ATM_CCTRESDEC_ERR

Message operation: %s failed to free CCT CNT resource for %s rc=0x%x
Description The system failed to decrement the circuit count when removing static PVCs or deactivating CCOD PVCs. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action If it is a static PVC, restart the RCM process. If it is a CCOD PVC, restart the ATMd process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to free cct resource for %s"

arg1: function name

arg2: pvc info

1.106   EVNT_ATM_CCTRESINC1_ERR

Message operation:'%s' failed to allocate CCT CNT resource for %s rc=0x%x
Description The system failed to allocate a circuit resource for the specified PVC. The message occurred because circuit resources have reached the maximum limit or the circuit resource count is corrupted.
Severity LOG_ERR
Action If PVC resources have reached the maximum limit, see_ATM_MAXCCTERR.

If the resource count is corrupted, see EVNT_ATM_DBXXERR.

Arg #1 current operation
Arg #2 the PVC information
Arg #3 the error return code from the previous function

1.107   EVNT_ATM_CCTRESINC_ERR

Message operation: %s failed to allocate CCT CNT resource for %s rc=0x%x
Description The system failed to increment the circuit count when configuring static PVCs or activating CCOD PVCs. The message occurred because the circuit count has reached the maximum limit or the system detected a corrupt database record.
Severity LOG_ERR
Action If it is a static PVC, restart the RCM process. If it is a CCOD PVC, restart the ATMd process. If the problem persists, contact customer support.
Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to allocate cct resource for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.108   EVNT_ATM_CCTSTATEERR

Message operation= %s error on cct state change, rc = %d
Description This system failed to change the state of an ATM circuit. This message occurred because the change was not sent to ISM or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm pvc slot/port vpi vpi vci vci detail and show circuit atm commands.

Restart the ATM and ISM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s - error on cct state, rc = %d"

arg1: function name

arg2: error code

1.109   EVNT_ATM_CCT_UPDATE

Message %s: cct update failure for %s rc=%#x
Description The ATMd process failed to update circuit changes when updating or creating a circuit.
Severity LOG_ERR
Action Log messages associated with this failure were produced before the event occurred. See the instructions about the event in the log.

If the PVC is stuck, try creating and deleting the PVC to reset it. If it is still stuck, then restart the ATMd process to resynchronize the circuit information with the actual PVC state.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code

1.110   EVNT_ATM_CHANDB1_ERR

Message operation=%s Failed to insert channel record for %s rc=%d
Description The system failed to insert a channel record into the database. This message occurred because there was insufficient memory to update the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands. Save the output of the commands and any log messages about the event.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 channel info
Arg #3 error code

1.111   EVNT_ATM_CHANDB2_ERR

Message operation=%s Failed to update channel record for %s rc=%d
Description The system failed to update a channel record in the database. This message occurred because there was insufficient memory to update the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands. Save the output of the commands and any log messages about the event.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 channel info
Arg #3 error code
Replaces "%s failed to update channel record for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.112   EVNT_ATM_CHANDB3_ERR

Message operation=%s Failed to retrieve channel record for %s rc=%d
Description The system failed to read a channel record. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show atm memory, and show memory commands. Save the command output and recent logs.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 channel info
Arg #3 error code
Replaces "%s: failed to find chan"

arg1: function name

1.113   EVNT_ATM_CHANDB4_ERR

Message operation=%s Failed to remove channel record for %s rc=%d
Description The system failed to remove a channel record.

This message occurred if the record did not exist or the system detected a corrupt database record.

Severity LOG_ERR
Action Enter the show config atm, show atm memory, and show memory commands. Save the command output and recent logs.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 channel info
Arg #3 error code

1.114   EVNT_ATM_CHANDEL_ERR

Message operation=%s Failed to process atm chn delete request rc %d
Description The system failed to delete an ATM port. This message occurred because there was a resources error or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration, show port slot/port detail, and show tech-support commands. Save the command output and recent logs.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "Failed to process atm chn delete request %d"

arg1: error code

1.115   EVNT_ATM_CHANOVERSUB_ERR

Message operation=%s Failed to process over-subscription update rc %d
Description The system failed to process a channel oversubscription update. This message occurred because there was a resource allocation error or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration, show port slot/port detail, and show tech-support commands. Save the command output and any logs related to the event.

Restart the RCM process.

Reduce the oversubscription rate or remove and reconfigure the port (this action affects service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "Failed to process over-subscription update %d"

arg1: error code

1.116   EVNT_ATM_CHAN_REMOVE

Message chan remove: %s failed rc=%#x for slot=%d port=%d
Description Channel deletion failed. This message occurred because the system deleted VPs, VCs, or ranges.
Severity LOG_ERR
Action Collect the output of the show tech-support and show port slot/port detail commands.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 channel info
Arg #2 error code
Arg #3 slot
Arg #4 port
Replaces "%s vp iter failed rc=%#x for slot=%d port=%d"

arg1: function name

arg2: error code

arg3: slot

arg4: port

1.117   EVNT_ATM_CHANSET_ERR

Message operation=%s Failed to process atm chn set request rc %d
Description The system failed to create an ATM port. This message occurred because there was a resource error or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration, show port slot/port detail, and show tech-support commands. Save the command output and recent logs.

Restart the RCM process.

Removing and reconfiguring the port may resolve the problem.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "Failed to process atm chn set request %d"

arg1: error code

1.118   EVNT_ATM_CHNDYNDB1_ERR

Message operation =%s Failed to insert dynamic channel record for %s in the database rc=%d
Description The system failed to insert a dynamic channel record in the database. This message occurred if the record did not exist or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, and show atm memory commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 channel info
Arg #3 error code

1.119   EVNT_ATM_CHNDYNDB2_ERR

Message operation =%s Failed to update dynamic channel record for %s in the database rc=%d
Description The system failed to update a dynamic channel record in the database. This message occurred because there was insufficient memory to update the record or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm memory, and show atm pvc detail commands.

Restart the ATM and RCM processes.

Remove and re-create the channel (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 channel info
Arg #3 error code
Replaces "%s - channel update failed rc=%#x, no: %d on slot %d"

arg1: function name

arg2: error code

arg3: channel

arg4: slot

1.120   EVNT_ATM_CHNDYNDB3_ERR

Message operation =%s Failed to get dynamic channel record for %s in the database rc=%d
Description The system failed to retrieve a dynamic channel record from the database. This message occurred if the record did not exist or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm memory, and show atm pvc detail commands.

Restart the ATM and RCM processes.

Remove and re-create the channel (this action impacts service) or create the channel if it has not been done.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 channel info
Arg #3 error code
Replaces "%s - no channel found rc=%#x, no: %d on slot %d"

arg1: function name

arg2: error code

arg3: channel

arg4: slot

1.121   EVNT_ATM_CHNDYNDB4_ERR

Message operation =%s Failed to remove dynamic channel record for %s in the database rc=%d
Description The system failed to remove a dynamic channel record from the database. This message occurred if the record did not exist or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm memory and show atm pvc detail commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 channel info
Arg #3 error code
Replaces "%s: dyn chan delete failed rc=%#x"

arg1: function name

arg2: error code

1.122   EVNT_ATM_CHUNKMEM

Message chunk mem %s alloc failed
Description The ATMd process failed to allocate memory for the event specified in argument 1.

Depending on the event specified in argument 1:

1) "ccod ism evt" means CCOD activity was affected.

2) "sar signal entry" means the SAR activity was affected.

There is probably a memory leak that should be investigated.

3) "ping data" means ATM ping was affected.

Severity LOG_ERR
Action Restart the ATMd process to avoid further degradation.

If the problem persists, contact customer support.

Arg #1 current operation

1.123   EVNT_ATM_CLRCCT_ERR

Message operation=%s failed to clear circuit for %s rc = %d
Description The system failed to clear ATM CCOD circuits. The message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands. Save the output of the commands and recent logs.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - failed to send clear sub to BE for %s"

arg1: function name

arg2: pvc info

1.124   EVNT_ATM_CLRRNGCCT_ERR

Message operation=%s failed to clear range circuit for %s rc = %d
Description The system failed to clear circuits in a range. The message occurred because there was a circuit allocation error, or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration, show memory, and show atm pvc slot/port all summary commands. Save the command output and recent log messages.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - Failed to clear all explicit PVCs %d"

arg1: function name

arg2: error code

1.125   EVNT_ATM_CMAPGET_ERR

Message operation =%s c_avoidance map 0x%x not found rc=%#x
Description The system failed to read the QoS congestion avoidance map from the database. This message occurred because the congestion avoidance map does not exist or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm pvc slot/port vpi vpi vci vci detail and show qos congestion-map cmap commands.

Restart the ATM and RCM processes.

Re-create the congestion-map.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 congestion map index
Arg #3 error code
Replaces "%s: c_avoidance_map %s not found rc=%#x for %s"

arg1: function name

arg2: avoidance map name

arg3: error code

arg4: pvc info

1.126   EVNT_ATM_COSCAMDECERR

Message operation=%s Failed to free SAR CAM allocated for atmwfq for %s %d
Description The system failed to free CAM resources for an ATM CoS queues. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Failed to free SAR CAM allocated for atmwfq for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.127   EVNT_ATM_COSCAMINCERR

Message operation=%s Failed to allocate SAR CAM allocated for atmwfq for %s %d
Description The system failed to allocate a CAM resource for ATM CoS queues. The message occurred because there were insufficient CoS queue entries in the hardware or the system detected a corrupt database record.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Failed to allocate SAR CAM allocated for atmwfq for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.128   EVNT_ATM_CTCNTDB1

Message operation='%s' Failed to insert circuit count record %s into database rc =0x%x
Description The system failed to insert a circuit count record into the database. This message occurred because there was insufficient memory to insert the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show process atm, and show config commands. Save the command output and recent logs.

Restart the RCM process.

The circuit count record is created during card configuration. Removing and reconfiguring the card may resolve the issue (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 slot info
Arg #3 the error code returned from database

1.129   EVNT_ATM_CTCNTDB2

Message operation ='%s' Failed to update circuit record %s in database rc=0x%x
Description The system failed to update a circuit count record in the database. This message occurred because there was insufficient memory to update the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show process atm, and show config commands. Save the command output and recent log messages.

Restart the RCM process.

The circuit count record is created during card configuration. Removing and reconfiguring the card may resolve the issue (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 slot info
Arg #3 the error code returned from database
Replaces "%s - failed to update PVC count record"

arg1: function name

1.130   EVNT_ATM_CTCNTDB3

Message operation ='%s' Failed to read circut record %s from database rc=0x%x
Description The system failed to read a circuit count record in the database. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Verify that the record was created by entering the show config atm command.

If the record does not exist, create the record.

Restart the RCM process.

The circuit count record is created during card configuration. Removing and reconfiguring the card may resolve the issue (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 slot info
Arg #3 the error code returned from database
Replaces "%s can not read cct count record"

arg1: function name

1.131   EVNT_ATM_CTCNTDB4

Message operation='%s' Failed to remove circuit record %s in database rc=0x%x
Description The system failed to remove a circuit count record from the database. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Verify that the record was already created by entering the show atm resource count slot command.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 slot info
Arg #3 the error code returned from database

1.132   EVNT_ATM_CTXID_ERR

Message operation=%s Invalid context id for the pvc rc = %d
Description The system failed to identify the context associated with a PVC. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show memory, and show atm memory commands. Save the command output and recent logs.

Restart the RCM or ATM process. If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "Invalid context id for the pvc %s"

arg1: protocol circuit

1.133   EVNT_ATM_CTXNAMEGET_ERR

Message operation=%s cannot obtain context name %s for %s rc = %d
Description The system failed to obtain the context record from the Context Manager. This message occurred because the context record does not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration command and save the output and log files.

Restart the RCM or ATM processes.

Remove and reconfigure the context (this action affects service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 context name
Arg #3 PVC info
Arg #4 error code
Replaces "%s - cannot obtain context name %d/%d %d %d"

arg1: function name

arg2: slot

arg3: port

arg4: vpi

arg5: vci

1.134   EVNT_ATM_CTXPVCADD_ERR

Message operation=%s failed handling add context for PVC rc %d
Description The system failed to add a context to a PVC. This message occurred if the context record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config and show context all commands. Save the output and recent logs.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s: failed handling add context %d"

arg1: function name

arg2: error code

1.135   EVNT_ATM_CTXPVCDEL_ERR

Message operation=%s failed handling delete context for PVC rc %d
Description The system failed to remove a PVC binding when removing a context. This message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Run the show tech-support and show history global commands, save the output and recent log files.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s: failed handling delete context %d"

arg1: function name

arg2: error code

1.136   EVNT_ATM_CTXRNGADD_ERR

Message operation=%s failed handling add context for range rc %d
Description The system failed to add a context to the specified PVC range. This message occurred if the context record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config and show context all commands. Save the output and recent log files.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s: failed handling add context %d for PVC range"

arg1: function name

arg2: error code

1.137   EVNT_ATM_CTXRNGDEL_ERR

Message operation=%s failed handling delete context for range rc %d
Description The system failed to remove the range binding when removing a context. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Run the show tech-support and show history commands. Save the output and recent log files.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s: failed handling delete context %d for PVC range"

arg1: function name

arg2: error code

1.138   EVNT_ATM_DB1_ERR

Message %s: atmlib_db_init rc= %d
Description The ATMd process failed to initialize the database library. This is an internal problem causing the ATMd process to stop and restart.
Severity LOG_ERR
Action The system restarts the ATMd process automatically.

Contact customer support for further investigation.

Arg #1 db init
Arg #2 return code

1.139   EVNT_ATM_DBLOCK_ERR

Message operation=%s failed to obtain lock for %s rc %d
Description The system failed to obtain a database lock.
Severity LOG_ERR
Action Run the show tech-support and show history global commands, save the output, and contact customer support.
Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to obtain lock for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.140   EVNT_ATM_DBUNLOCK_ERR

Message operation=%s failed to unlock for %s rc %d
Description The system failed to release a database lock.
Severity LOG_ERR
Action Run the show tech-support and show history global commands, save the output, and contact customer support.
Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to unlock for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.141   EVNT_ATM_DESCDB1

Message operation=%s unable to insert profile description '%s' for profile '%s' rc = %d
Description The system failed to insert a profile description into the database. The message occurred because there was insufficient memory to insert the description or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands. Save the command output and log files.

Restart the RCM process.

Shorten the profile description.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 current description
Arg #3 profile name
Arg #4 error code
Replaces "%s - unable to create profile description '%s' for profile '%s'"

arg1: function name

arg2: description

arg3: profile name

1.142   EVNT_ATM_DESCDB2

Message operation=%s unable to update profile description '%s' for profile '%s' rc = %d
Description The system failed to update a profile description in the database. This message occurred because there was insufficient memory to update the description or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands. Save the output of the commands and recent logs.

Restart the RCM process.

Shorten the description.

If the problem persists, contact customer support

Arg #1 current operation
Arg #2 current description
Arg #3 profile name
Arg #4 error code
Replaces "%s - unable to update profile description '%s' for profile '%s'"

arg1: function name

arg2: description

arg3: profile name

1.143   EVNT_ATM_DESCDB3

Message operation=%s unable to read profile description profile 0x%x rc = %d
Description The system failed to read a profile description. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show configuration, show memory, and show atm memory commands. Save the output of the commands and recent logs.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 current description
Arg #3 profile name
Arg #4 error code
Replaces "%s - unable to retrieve configured description for grid 0x%x"

arg1: function name

arg2: profile grid

1.144   EVNT_ATM_DESCDB4

Message operation=%s unable to remove profile description '%s' for profile '%s' rc = %d
Description The system failed to remove a profile description. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration, show memory, and show atm memory commands. Save the command output and recent logs.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 current description
Arg #3 profile name
Arg #4 error code
Replaces "%s - unable to delete profile description for profile '%s'"

arg1: function name

arg2: profile name

1.145   EVNT_ATM_DLATMWFQ_ERR

Message operation=%s failed to send CONFIG_START, rc %d
Description The system failed to send a config start message to the backend process. The message occurred because there was a resources error or the system detected a corrupt database record.
Severity LOG_ERR
Action Run the show tech-support command, save the output, and contact customer support.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s - failed to send CONFIG_START"

arg1: function name

1.146   EVNT_ATM_DLCARD_ERR

Message operation=%s failed downloading cards, rc %d
Description The system failed to send a card configuration to the backend process. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Run the show tech-support command, save the output, and contact customer support.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s - failed downloading cards, rc %d"

arg1: function name

arg2: error code

1.147   EVNT_ATM_DLCFGST_ERR

Message operation=%s failed to send CONFIG_START, rc %d
Description The system failed to send a config start message to the backend process. The log message occurred because there was a resources error or the system detected a corrupt database record.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and recent logs.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s - failed to send CONFIG_START"

arg1: function name

1.148   EVNT_ATM_DNLD_CFG

Message download %s failed rc=%#x
Description The ATMd process failed to download the configuration to the SARC.
Severity LOG_ERR
Action Restart the ATMd process to reload the configuration again.

If the problem persists, contact customer support.

Arg #1 chan, vp, pvc, or range
Arg #2 return code

1.149   EVNT_ATM_DYNPROF_ERR

Message operation=%s failed to apply dynamic profile for %s rc = %d
Description The system failed to apply a dynamic profile to a PVC. This message occurred because the profile had invalid attributes, because there were insufficient resources to apply the change, or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show memory, and show atm memory commands. Save the command output and recent logs.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - Failed to default the profile for %s"

arg1: function name

arg2: pvc info

1.150   EVNT_ATM_ENCAPCELL_ERR

Message operation=%s ATM_CELL Encap is only supported on VC-Fair SAR IMAGE
Description The hardware does not support cell encapsulation.
Severity LOG_ERR
Action Enter the show config atm, show memory, and show atm memory commands and save the output. See the SmartEdge documentation for more information.
Arg #1 current operation
Replaces "%s - ATM_CELL Encap is only supported on VC-Fair SAR IMAGE"

arg1: function name

1.151   EVNT_ATM_ENDVCI_ERR

Message operation=%s CCOD: Invalid stop vci: %d
Description The end VCI is invalid. The system should have verified the VCI value.
Severity LOG_ERR
Action Correct the VCI value and re-create the CCOD range. For more information, see the SmartEdge documentation.
Arg #1 current operation
Arg #2 end vci value
Replaces "CCOD: Invalid stop vci: %d"

arg1: end vci

1.152   EVNT_ATM_ENDVPI_ERR

Message operation=%s CCOD: Invalid stop vpi: %d
Description The end VPI is invalid. The system should have verified the VPI value.
Severity LOG_ERR
Action Correct the VPI value and re-create the CCOD range. For more information, see the SmartEdge documentation.
Arg #1 current operation
Arg #2 vpi value
Replaces "CCOD: Invalid stop vpi: %d"

arg1: end vpi

1.153   EVNT_ATM_EXTOP1_ERR

Message operation=%s Transaction mode %d not supported
Description The transaction is not supported. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration and show memory commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 transaction mode
Replaces "%s mode %d not supported"

arg1: function name

arg2: operation mode

1.154   EVNT_ATM_EXTOP2_ERR

Message operation=%s invalid callback handler
Description The callback handler for the external transaction was invalid. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration and show memory commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Replaces "%s no callback handler"

arg1: function name

1.155   EVNT_ATM_EXTOP3_ERR

Message operation=%s unable to setup extop, out of memory
Description The system failed to allocate enough memory to send messages from one process to another. The message occurred because the available memory was insufficient for the operation or the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show configuration and show memory commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Replaces "%s - unable to setup extop, out of memory"

arg1: function name

1.156   EVNT_ATM_EXTOP_ERR

Message operation=%s fail to add extop rc %d
Description The system failed to allocate enough memory to send messages from one process to another. The message occurs if there is insufficient memory for the operation or the system detects corrupt database records.
Severity LOG_ERR
Action Restart the RCM process or remove and re-create the ATM card (this action impacts service). If the problem persists, contact customer support.
Arg #1 current operation
Arg #2 error code
Replaces "%s fail to add extop rc %d"

arg1: function name

arg2: error code

1.157   EVNT_ATM_FLUSH_ERR2

Message invalid %s on %s sar %d
Description The ATMd process detected internal errors with the command batch to the SARC. Arg #1 indicates the cause.
Severity LOG_ERR
Action Contact customer support to investigate this further.
Arg #1 current operation
Arg #2 endpoint name
Arg #3 sar idx

1.158   EVNT_ATM_GRIDRECOV_ERR

Message operation=%s could not reserve grids %u to %u rc =%d
Description The system failed to recover grids from the database. The message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show configuration, show memory, and show atm memory commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 starting grid
Arg #3 end grid
Arg #4 error code
Replaces "%s - could not reserve grids %u to %u"

arg1: function name

arg2: start grid

arg3: end grid

1.159   EVNT_ATM_IDLE1_ERR

Message %s: cct is not on-demand
Description Idle-down expired on a PVC that is not a CCOD PVC. Only a CCOD range can be configured with idle-down.
Severity LOG_ERR
Action Verify the PVC type by entering the show atm pvc command with the circuit details from the log message.

If the PVC is of CCOD type, then enter the clear atm circuit command to return the PVC back to the dormant state.

Arg #1 idle expire

1.160   EVNT_ATM_IDLE2_ERR

Message %s - idle down timer is not set
Description Idle-down expired on a CCOD PVC on which the timer had not been set. This is an abnormal failure that should not happen.
Severity LOG_ERR
Action Identify the PVC by entering the show atm pvc command with the circuit details from the log message. Save the command output and log messages and notify customer support about this failure.

Enter the clear atm circuit command to manually return the PVC to the dormant state (if that is desired).

Arg #1 idle expire

1.161   EVNT_ATM_IDLE3_ERR

Message %s: Invalid Idle-down seconds value returned. No idle-down being performed.
Description When starting an idle-down timer the system detected an invalid timed-out value. Invalid values are abnormal and disable the idle-down setting.
Severity LOG_ERR
Action Verify the idle-down configuration by entering the show config atm command.

You can manually reset PVCs to the dormant state with the clear atm circuit command.

Arg #1 idle start

1.162   EVNT_ATM_IDSPC_ERR

Message operation=%s Failed to initialize the ATM pvc description grid space rc = %d
Description The system failed to find grid space for an ATM PVC description. This message occurred because all grids were in use or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration and show memory commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "Failed to initialize the ATM pvc description grid space"

1.163   EVNT_ATM_IFCCTDEL_ERR

Message operation=%s failed to delete cct from ISM rc= %d%s - failed to delete cct %s from ISM
Description The system failed to delete a circuit from Interface Manager. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show memory, and show atm memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code

1.164   EVNT_ATM_IFGRIDGET_ERR

Message operation=%s cannot obtain interface grid for %s rc = %d
Description The system failed to obtain an interface grid from Interface Manager. This message occurred because the interface record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration command and save the output.

Restart the RCM or ATM process.

Create another interface and bind the PVC to the new interface.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - cannot obtain interface grid for %s"

arg1: function name

arg2: range info

1.165   EVNT_ATM_INIT3_ERR

Message %s: Unable to initialize idle-down ftimer library.
Description CCOD module initialization failed, which caused the ATMd process to also fail.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and log files.

If the problem persists, contact customer support.

Arg #1 current operation
Replaces "Unable to initialize idle-down ftimer library."

1.166   EVNT_ATM_INVALIDSAR_ERR

Message operation=%s invalid sar hardware for %s sar_hw %d
Description The SAR hardware type is invalid for the operation.
Severity LOG_ERR
Action Remove and reconfigure the card (this action affects service).
Arg #1 current operation
Arg #2 pvc info
Arg #3 sar hardware code
Replaces "%s invalid sar hardware for %s"

arg1: function name

arg2: pvc info

1.167   EVNT_ATM_IPC1_ERR

Message %s: Invalid ISM object (hdr_len EQ 0)
Description The ATMd process received an event with 0 length and the event was dropped. This is an abnormal condition.
Severity LOG_ERR
Action Contact customer support for further investigation.
Arg #1 current operation

1.168   EVNT_ATM_IPC2_ERR

Message %s: failed to lookup atm ping data: slot(%d), chan(%d), vpi(%d), vci(%d)
Description A ping session was not found for the associated ping result. The ping result was dropped.
Severity LOG_ERR
Action Examine the logs to determine if this a transient condition. Save the log files.

If it was an isolated event, no action is needed.

If the problem persists, contact customer support for further investigation.

Arg #1 current operation
Arg #2 slot
Arg #3 channel
Arg #4 vpi
Arg #5 vci

1.169   EVNT_ATM_IPC3_ERR

Message %s: Subscriber message type unknown: %d.
Description The ATMd process received a AAA event of unknown type and the event was dropped. This is an internal abnormal condition that should be investigated.
Severity LOG_ERR
Action Contact customer support for further investigation.
Arg #1 current operation
Arg #2 event type

1.170   EVNT_ATM_IPC4_ERR

Message %s: Invalid SARC object (hdr_len EQ 0)
Description The ATMd process received a SARC event with a length of 0 and the event was dropped. This is an abnormal internal condition that should be investigated.
Severity LOG_ERR
Action Contact customer support for further investigation
Arg #1 current operation

1.171   EVNT_ATM_IPC5_ERR

Message %s: Failure in registering IPC receive endpoint
Description The ATMd process failed to initialize the IPC endpoint, preventing it from receiving events from other modules. This is an abnormal internal condition that should be investigated.
Severity LOG_ERR
Action Contact customer support for further investigation.
Arg #1 current operation

1.172   EVNT_ATM_IPC6_ERR

Message %s: IPC receive handler: unknown msg 0x%x
Description The ATMd process received an event from an unknown module and the event was dropped. This is an abnormal internal condition that should be investigated.
Severity LOG_ERR
Action Contact customer support for further investigation.
Arg #1 current operation
Arg #2 event module id

1.173   EVNT_ATM_IPCGET_ERR

Message operation= %s Failure of lookup ipc endpoint: %s rc=%#x
Description The system failed to find an IPC endpoint. This message occurred because the end point is not available or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support and show process atm diag detail commands.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 endpoint name
Arg #3 error code
Replaces "%s - Failure IPC:%d looking up the SARC Endpoint"

arg1: function name

arg2: error code

1.174   EVNT_ATM_IPCNTDB1

Message operation=%s Failed to insert IP Host count record %s into database rc =0x%x
Description The system failed to insert an IP host count record into the database. This message occurred because there was insufficient memory to insert the bandwidth record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show process, and show config atm commands. Save the output.

Restart the RCM process.

As a last resort, reload the system by entering the reload command (this action impacts service) or reload it and switch the standby controller card to the active one by entering the reload switch-over command.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 the error code returned from database

1.175   EVNT_ATM_IPCNTDB2

Message operation = %s Failed to update IP Host record %s in database rc=0x%x
Description The system failed to update the IP host count record in the database. This message occurred because there was insufficient memory to update the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show process atm, show config and show atm resource glb-count commands and save the output.

Restart the RCM process.

As a last resort, reload the system by entering the reload command (this action impacts service) or reload it and switch the standby controller card to the active one by entering the reload switch-over command.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 the error code returned from database
Replaces "%s - failed to update global IP count record"

arg1: function name

1.176   EVNT_ATM_IPCNTDB3

Message operation = %s Failed to read IP Host record %s from database rc=0x%x
Description The system failed to read an IP host count record in the database. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Verify that the record was created by entering the show config atm command.

If the record does not exist, create the record.

Restart the RCM process.

As a last resort, reload the system by entering the reload command (this action disrupts service) or reload it and switch the standby controller card to the active one by entering the reload switch-over command.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 the error code returned from database
Replaces "%s failed to read glb ip host count record rc %d"

arg1: function name

arg2: error code

1.177   EVNT_ATM_IPCNTDB4

Message operation=%s Failed to remove IP record %s in database rc=0x%x
Description The system failed to remove an IP count record from the database. This message occurred if the IP count record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Verify that the record was created by entering the show config atm and show atm resource glb-count commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 the error code returned from database

1.178   EVNT_ATM_IPCNTINIT_ERR

Message operation=%s failed to re-init IP count rc: %d process: %d
Description The system failed to initialize the IP host count when the system was booting or after a process was restarted. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to re-init IP Host count rc: %d"

arg1: function name

arg2: error code

1.179   EVNT_ATM_IPCREPLY_ERR

Message operation= %s invalid ipc reply
Description The system failed to receive IPC messages. This message occurred because the end point is not available or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support and show process atm diag detail commands.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Replaces "atm_sarc_process_reply - invalid ipc hdr in reply from sarc %d"

arg1: sar idx

1.180   EVNT_ATM_IPCSEND_ERR

Message operation= %s ipcSend of %s failed with rc %d
Description The system failed to send IPC messages. This message occurred because the end point is not available or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support and show process atm diag detail commands.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 endpoint name
Arg #3 error code
Replaces "%s - ipcSend of %s failed with rc %d on sarc no. %d"

arg1: function name

arg2: endpoint name

arg3: sar idx

1.181   EVNT_ATM_IPCSETEND_ERR

Message operation= %s Failure of setting ipc endpoint: %s rc=%#x
Description Failed to find the IPC end point. This message occurred because the end point was not available or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support and show process atm diag detail commands.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 endpoint name
Arg #3 error code
Replaces "Fail to setup IPC endpoint for %s (error %d)"

arg1: endpoint name

arg2: error code

1.182   EVNT_ATM_IPDYNDB1_ERR

Message operation =%s Failed to insert dynamic IP host record for %s in the database rc=%d idx: %d
Description The system failed to insert a dynamic IP host record in the database. This message occurred because there was insufficient memory to update the record or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support and show process atm diag detail commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Arg #4 IP host index

1.183   EVNT_ATM_IPDYNDB2_ERR

Message operation =%s Failed to update dynamic IP host record for %s in the database rc=%d idx %d
Description The system failed to update a dynamic IP host record in the database. This message occurred because there was insufficient memory to insert the record or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support and show process atm diag detail commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Arg #4 IP host index

1.184   EVNT_ATM_IPDYNDB3_ERR

Message operation =%s Failed to get dynamic IP host record for %s in the database rc=%d idx %d
Description The system failed to read the dynamic IP host record in the database. This message occurred because the record did not exist or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support and show process atm diag detail commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Arg #4 IP host index
Replaces "%s Failed to retrieve IP host for rc %d IP host idx: %d"

arg1: function name

arg2: error code

arg3: index

1.185   EVNT_ATM_IPDYNDB4_ERR

Message operation =%s Failed to remove dynamic IP host record for %s in the database rc=%d idx %d
Description The system failed to remove a dynamic IP host record from the database. This message occurred if the record did not exist or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support and show process atm diag detail commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Arg #4 IP host index

1.186   EVNT_ATM_IPHOSTDB1_ERR

Message operation=%s Failed to insert iphost record for %s rc = %d
Description The system failed to insert an IP host count record in the database. This message occurred because there was insufficient memory to insert the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration, show memory, and show atm resource glb-count commands. Save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code

1.187   EVNT_ATM_IPHOSTDB2_ERR

Message operation=%s Failed to update iphost record for %s rc = %d
Description The system failed to update an IP host count record in the database. This message occurred because there was insufficient memory to update the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration, show memory, and show atm resource glb-count commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "Cannot update IP host %#x"

arg1: error code

1.188   EVNT_ATM_IPHOSTDB3_ERR

Message operation=%s Failed to read iphost record for %s rc = %d
Description The system failed to read an IP host record in the database. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration, show memory, and show atm resource glb-count commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - Cannot read IPhost record idx=%d, rc=%#x"

arg1: function name

arg2: last host index

arg3: error code

1.189   EVNT_ATM_IPHOSTDB4_ERR

Message operation=%s Failed to remove iphost record for %s rc = %d
Description The system failed to remove an IP host record from the database. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration, show memory, and show atm resource glb-count commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - failed to delete iphost for %s"

arg1: function name

arg2: circuit

1.190   EVNT_ATM_IPHOSTDB5_ERR

Message operation=%s Failed to insert iphost key for %s rc = %d
Description The system failed to insert a key for an IP host record. This message occurred if the IP host record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration, show memory, and show atm resource glb-count commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - Cannot delete IPhost reinsert seckey old_idx=%d,new_idx=%d rc=%#x"

arg1: function name

arg2: last host index

arg3: deleted host count

arg4: error code

1.191   EVNT_ATM_IPHREASIGNERR

Message operation=%s Cannot reassign the iphost for %s rc = %d
Description The system failed to reassign an IP host to the PVC. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration, show memory, and show atm resource glb-count commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "Cannot reassign the iphost %d"

arg1: error code

1.192   EVNT_ATM_IPHRESADD_ERR

Message operation=%s failed to decrement IP host count for %s rc = %d
Description The system failed to increment the IP host count in the database. This message occurred because the IP host count has reached the maximum limit or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration, show memory, and show atm resource glb-count commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s failed to decrement IP host count for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.193   EVNT_ATM_IPHRESDEL_ERR

Message operation=%s failed to decrement IP host count for %s rc = %d
Description The system failed to increment the IP host count. This message occurred because the IP host count has reached the maximum limit or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration, show memory, and show atm resource glb-count commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to decrement IP host count for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.194   EVNT_ATM_IPSHOTKEY_ERR

Message operation: %s Failed to reassign dyn IP host rc %d IP host idx: %d
Description The system failed to reassign an IP host value to a PVC.
Severity LOG_ERR
Action Collect the output of the show tech-support and show process atm diag detail commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Arg #3 IP host index

1.195   EVNT_ATM_ITFGRID_ERR

Message operation=%s Invalid interface grid for the pvc rc = %d
Description Interface Manager failed to find the interface record because the grid is invalid. This message occurred if the interface did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show memory, and show atm memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "Invalid interface grid for the pvc %s"

arg1: protocol circuit

1.196   EVNT_ATM_ITFPVCCHG_ERR

Message operation=%s failed handling change interface for PVC rc %d
Description The system failed to update a PVC binding when changing an interface attribute. The message occurred if there was a resources error or the system detected a corrupt database record.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and recent logs.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s: failed handling change interface %d"

arg1: function name

arg2: error code

1.197   EVNT_ATM_ITFPVCDEL_ERR

Message operation=%s failed handling delete interface for PVC rc %d
Description The system failed to remove a PVC binding when removing an interface. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and recent logs.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s: failed handling delete interface %d"

arg1: function name

arg2: error code

1.198   EVNT_ATM_ITFRNGCHG_ERR

Message operation=%s failed handling change interface for range rc %d
Description The system failed to update a binding range when changing an interface attribute. This message occurred if there was a resources error or the system detected a corrupt database record.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and recent logs.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s: failed handling change interface %d"

arg1: function name

arg2: error code

1.199   EVNT_ATM_ITFRNGDEL_ERR

Message operation=%s failed handling delete interface for range rc %d
Description The system failed to remove a binding range when removing an interface. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and recent logs.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s: failed handling delete interface %d"

arg1: function name

arg2: error code

1.200   EVNT_ATM_L1AGGGET_ERR

Message operation=%s can't find L1 aggregate cct for %s rc = %d
Description The system failed to find an L1 aggregate circuit from Interface Manager. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration and show port slot/port detail commands and save the output.

Restart the RCM process.

Remove and re-create the port (this action impacts service).

If the problem persists, contact customer support

Arg #1 current operation
Arg #2 port info
Arg #3 error code
Replaces "%s can't find L1 aggr cct for chan circ %s"

arg1: function name

arg2: working circuit

1.201   EVNT_ATM_L1CCGET_ERR

Message operation=%s can't find L1 constituent cct for %s rc = %d
Description Interface Manager failed to find an L1 constituent circuit. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration and show port slot/port detail commands and save the output.

Restart the RCM process.

Remove and re-create the port (this action affects service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 port info
Arg #3 error code
Replaces "%s can't find L1 constituent cct for chan circ %s"

arg1: function name

arg2: working circuit

1.202   EVNT_ATM_LGGET_ERR

Message operation=%s unable to get link group info rc = %d
Description The system failed to get a link group record from the Link Group Manager. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration, show memory, and show atm memory commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "Error %d: unable to configure QOS on on-demand link-group circuit"

arg1: error code

1.203   EVNT_ATM_MAIN

Message atm init: %s failed, process exits
Description The system failed to initialize the ATMd process. This message occurred because there was insufficient memory to start the ATMd process or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support and show process atm diag detail commands.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 current operation

1.204   EVNT_ATM_MAXBW

Message %s bandwidth limit %s exceeds the limit %d/%d/%d
Description The system failed to allocate more bandwidth for the specified port. This message occurs if the bandwidth limit has been reached.
Severity LOG_ERR
Action Verify the number of PVCs that are configured and activated on the card by entering the show atm resources count slot command.

Check the bandwidth limit on the port by entering the show port port detail command.

Check the profile attributes by entering the show config atm and show atm profile prof-name commands.

If the bandwidth has not reached the maximum limit, perform one of the following steps:

-- If it is a static PVC, restart the RCM process.

-- If it is a CCOD PVC, restart the ATM process.

If the bandwidth has reached the maximum limit, remove some PVCs from the card.

Arg #1 current operation
Arg #2 port info
Arg #3 current bandwidth count of explicit PVC
Arg #4 current bandwidth count of activated CCOD
Arg #5 number of punch out PVCs
Replaces "%s %s bandwidth limit exceeds the limit %d/%d/%d"

arg1: function name

arg2: pvc info

arg3: Bandwidth ATMmgr count

arg4: Bandwidth ATMd count

arg5: punchout count

1.205   EVNT_ATM_MAXCCTERR

Message operation:'%s' Current count(%d/%d) + plus additional circuits (%d) exceed maximum limit of circuits punch_out_count: %d
Description The system failed to allocate additional circuits for the specified slot. The message occurs if the number of PVCs on the slot has reached the maximum limit.
Severity LOG_ERR
Action Check the number of PVCs that are configured and activated on the card by entering the show atm resources count slot command.

If the number of PVCs has not reached the maximum limit, perform one of the following steps:

-- If it is a static PVC, restart the RCM process.

-- If it is a CCOD PVC, restart the ATM process.

If the number of PVCs per slot has reached the maximum limit, remove some PVCs from the card.

Arg #1 current operation
Arg #2 current count of explicit PVC
Arg #3 current count of activated CCOD
Arg #4 number of additional circuits attempted to create
Arg #5 maximum circuits allowed in the card
Arg #6 number of punch out PVCs
Replaces "%s - Current count(%d/%d) + plus additional circuits (%d) exceed maximum limit of circuits (%lld) punch_out_count: %d",

arg1: function name

arg2: Circuit ATMmgr count

arg3: Circuuit ATMd count

arg4: number of circuits

arg5: max circuits per card

arg6: punchout count

1.206   EVNT_ATM_MAXIPHOST

Message operation = %s exceed ip host count limit per system %d %s
Description The system failed to assign more IP hosts in the system. The message occurs if the IP host count has reached the maximum limit or the system detects a corrupt database record.
Severity LOG_ERR
Action Verify the number of IP hosts in the system by entering the show config atm and show atm resource glb-count commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 maximum IP host in the system
Arg #3 pvc info
Replaces "%s exceed ip host count limit per system %d"

arg1: function name

arg2: max IP host allowed in the system

1.207   EVNT_ATM_MAXOAM

Message operation=%s Reached maximum OAM limits in system rcm/atmd: %d/%d max: %d %s
Description The system failed to assign more OAM resources on the card. This message occurs because the OAM count reaches the maximum limit or the system detects corrupt database records.
Severity LOG_ERR
Action Verify the number of OAM resources on the card by entering the show config atm and show atm profile details commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 current oam count for explicit PVCs
Arg #3 current oam count for activated CCOD
Arg #4 max oam allowed per card
Arg #5 pvc info
Replaces "%s Reached maximum OAM limits in system rcm/atmd: %d/%d %s"

arg1: function name

arg2: OAM ATMmgr count

arg3: OAM ATMd count

arg4: pvc info

1.208   EVNT_ATM_MAXVCINCARDERR

Message operation=%s Reached maximum vcs in VCs on card :%d/%d max: %d %s
Description The system failed to assign more VC tunnels on the card. The message occurred because the vc_in_card (number of VCs per card) count had reached the maximum limit or the system detected a corrupt database record.
Severity LOG_ERR
Action Verify the number of VC tunnels on the card by entering the show config atm and show atm profile details commands. Save the command output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 current vc_in_card count for explicit PVCs
Arg #3 current vc_in_card count for activated CCOD
Arg #4 max oam allowed per card
Arg #5 slot info
Replaces "%s Reached maximum vcs in VCs on card %u punchout count: %d"

arg1: function name

arg2: VC ATMmgr count

arg3: VC ATMd count

arg4: punchout count

1.209   EVNT_ATM_MAXVCINVP_ERR

Message operation=%s Reached maximum vcs in VP :%d/%d max: %d %s
Description The system failed to assign more VC tunnels in the specified VP. The message occurred because the vc_in_vp count (number of VCs per VP) count had reached the maximum limit or the system detected a corrupt database record.
Severity LOG_ERR
Action Verify the number of VC tunnels in the VP by entering the show config atm and show atm pvc slot/port vpi all summary commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 current vc_in_vp count for explicit PVCs
Arg #3 current vc_in_vp count for activated CCOD
Arg #4 maximum number of vc tunnels allowed per vp
Arg #5 pvc info
Replaces "%s Cannot create VC - reached maximum within VP %d: %d/%d/%d"

arg1: function name

arg2: vpi

arg3: VCinVP ATMmgr count

arg4: VCinVP ATMd count

arg5: punchout count

1.210   EVNT_ATM_MAXVPINPORT_ERR

Message operation=%s reach maximum limit of VP per port: %d %s%s reach maximum limit of VP per port: %d
Description The system failed to allocate more VPs on a port. This message occurred because the vp_in_port (number of VPs per port) count had reached the maximum limit or the system detected a corrupt database record.
Severity LOG_ERR
Action Verify the number of VPs on the port by entering the show config atm and show atm vp slot/port all summary commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 maximum number of vc tunnels allowed per vp
Arg #3 port info

1.211   EVNT_ATM_MBEGET_ERR

Message operation=%s fail to get record from backend process rc = %d
Description The system failed to obtain a protection port record. The message occurred because the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration, show aps group detail, and show port slot/port detail commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "Invalid show criteria %d for the channel errors request"

arg1: criteria

1.212   EVNT_ATM_MEMALLOC_ERR

Message operation=%s failed to cannot allocate memory
Description The RCM process failed to allocate free memory. This message occurred because all memory was in use or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration and show memory commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Replaces "%s - cannot allocate memory for pvc description record"

arg1: function name

1.213   EVNT_ATM_MK3COSQ_ERR

Message operation=%s Error Adding Cosq - Max Number

Sar contexts exceeded: port %d (%d/%d)

" for num_cosq %d and sar_hw_type %d"

Description The system failed to add CoS queues on an ATM OC-3/STM-1 8-port card. The message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show tech-support and show hardware card slot detail commands. Save the output and all log messages.

Restart the RCM process and enter the reload card slot command.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 slot
Arg #3 port
Arg #4 channel
Arg #5 cosq number
Arg #6 SAR hardware type

1.214   EVNT_ATM_MK3PORTNUM_ERR

Message operation=%s Adding VP Tunnel -Max Number Sar contexts exceeded: port %d (%d/%d) for sar_hw_type %d
Description The system failed to add VP tunnels on an ATM OC-3/STM-1 8-port card. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show tech-support and show hardware card slot detail commands and save the output and log messages.

Restart the RCM process and enter the reload card slot command.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 slot
Arg #3 port
Arg #4 channel
Arg #5 SAR hardware type
Arg #6 SAR hardware type
Replaces "%s - Adding VP Tunnel -Max Number Sar contexts exceeded: port %d (%d/%d) for sar_hw_type %d",

arg1: function name

arg2: port

arg3: vpi

arg4: vci

arg5: sar hardware type

1.215   EVNT_ATM_MK3VPNUM_ERR

Message operation=%s Adding VP Tunnel -Max Number

Sar contexts exceeded: port %d (%d/%d) for sar_hw_type %d

Description The system failed to add a VP tunnel on an ATM OC-3/STM-1 8-port card. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show tech-support and show hardware card slot detail commands and save the output and the log messages.

Restart the RCM process and enter the reload card slot command.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 slot
Arg #3 port
Arg #4 channel
Arg #5 SAR hardware type
Replaces "%s - Adding VP Tunnel -Max Number Sar contexts exceeded: port %d (%d/%d) for sar_hw_type %d"

arg1: function name

arg2: port

arg3: vpi

arg4: vci

arg5: sar hardware type

1.216   EVNT_ATM_MOCMD_ERR

Message operation=%s Invalid MO command 0x%08x
Description The system send an invalid request to the backend process. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show configuration and show memory commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 MO request number
Replaces "%s - Invalid MO command 0x%08x"

arg1: function name

arg2: message ID

1.217   EVNT_ATM_OAMCNTCRT_ERR

Message operation=%s failed to create OAM resources for %s rc %d
Description The system failed to create an OAM count record when creating an ATM card. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to create OAM resources for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.218   EVNT_ATM_OAMCNTDB1

Message operation=%s Failed to insert OAM count record %s into database rc =0x%x
Description The system failed to insert an OAM count record into the database. This message occurred because there was insufficient memory to insert the record or the system detected corrupt database records.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show process atm, and show config atm commands. Save the command output and log messages.

Restart the RCM process.

If the problem persists, contact customer support.

The OAM count is created during card configuration. Removing and reconfiguring the card may resolve the issue (this action impacts service).

Arg #1 current operation
Arg #2 slot info
Arg #3 the error code returned from database

1.219   EVNT_ATM_OAMCNTDB2

Message operation = %s Failed to update OAM record %s in database rc=0x%x
Description The system failed to update an OAM count record in the database. This message occurred because there was insufficient memory to update the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show process atm, and show config atm commands.

Restart the RCM process.

The OAM count is created during card configuration. Removing and reconfiguring the card may resolve the issue (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 slot info
Arg #3 the error code returned from database
Replaces "%s failed to update OAM count record for %s, rc: %d"

arg1: function name

arg2: pvc info

arg3: error code

1.220   EVNT_ATM_OAMCNTDB3

Message operation = %s Failed to read OAM record %s from database rc=0x%x
Description The system failed to read an OAM count record in the database. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Verify that the record was created by entering the show config atm and show atm profile detail commands.

If the record does not exist, create the record.

Restart the RCM process.

The OAM count is created during card configuration. Removing and reconfiguring the card may resolve the issue (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 slot info
Arg #3 the error code returned from database
Replaces "%s - failed to read oam count record for %s"

arg1: function name

arg2: pvc info

1.221   EVNT_ATM_OAMCNTDB4

Message operation=%s Failed to remove oam count record %s in database rc=0x%x
Description The system failed to remove an OAM count record from the database. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Verify that the record was already created by entering the show config atm and show atm profile detail commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 slot info
Arg #3 the error code returned from database

1.222   EVNT_ATM_OAMCNTDEC_ERR

Message operation=%s failed to free OAM resources for %s rc %d
Description The system failed to decrement the OAM count when removing static PVCs or deactivating CCOD PVCs. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action If it is a static PVC, restart the RCM process. If it is a CCOD PVC, restart the ATMd process. If the problem persists, contact customer support.
Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to free OAM resource for %s"

arg1: function name

arg2: pvc info

1.223   EVNT_ATM_OAMCNTDEL_ERR

Message operation=%s failed to delete OAM resources for %s rc %d
Description The system failed to delete an OAM count record when removing an ATM card from configuration. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s fail to delete oam resources for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.224   EVNT_ATM_OAMCNTINC_ERR

Message operation=%s failed to allocate OAM resources for %s rc %d
Description The system failed to increment the OAM count when configuring static PVCs or activating CCOD PVCs. This message occurred because the OAM count reached the maximum limit or the system detected a corrupt database record.
Severity LOG_ERR
Action If it is a static PVC, restart the RCM process. If it is a CCOD PVC, restart the ATMd process. If the problem persists, contact customer support.
Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to allocate OAM resource for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.225   EVNT_ATM_OAMCNTINIT_ERR

Message operation=%s failed to re-init oam count rc: %d process: %d
Description The system failed to initialize the OAM count when the system was booting or after a process was restarted. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Removing and reconfiguring the card may resolve the issue (this action affects service). If the problem persists, contact customer support.
Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to re-init oam count rc: %d"

arg1: function name

arg2: error code

1.226   EVNT_ATM_OAM_ERR

Message conflicting %s set and clear operation
Description The ATMd process failed to configure the OAM because of conflicting set and clear settings. Arg #1 indicates the OAM type.
Severity LOG_ERR
Action Check the OAM settings in the ATM profile.

Contact customer support to investigate this error.

Arg #1 current operation

1.227   EVNT_ATM_PING_POLL1

Message poll ping: unable to find ping data for %s
Description The system failed to send a PING message because it failed to find the PING data. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support and show circuit slot/port atm commands.

Restart the ATM process or reload the card.

If the problem persists, contact customer support.

Arg #1 pvc info
Replaces "%s: unable to find ping data for %s"

arg1: function name

arg2: pvc info

1.228   EVNT_ATM_PING_POLL2

Message poll ping: Unknown OAM flow type %d
Description The system failed to send a PING message because of an invalid OAM flow type. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support and show circuit slot/port atm commands.

Correct the OAM flow type (see the SmartEdge documentation for more information).

Restart the ATM process or reload the ATM card (this action impacts service)

If the problem persists, contact customer support.

Arg #1 OAM flow type
Replaces "%s Unknown OAM flow type %d"

arg1: OAM flow type

1.229   EVNT_ATM_PING_START1

Message start ping: Unknown OAM flow type %d
Description The system failed to start PING because the OAM flow type was not supported.
Severity LOG_ERR
Action Collect the output of the show tech-support command.

Correct the OAM flow type (see the SmartEdge documentation for more information).

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 OAM flow type
Replaces "%s Unknown OAM flow type %d"

arg1: function name

arg2: OAM flow type

1.230   EVNT_ATM_PING_START2

Message start ping: %s not yet created on hardware cir_id:%d request: %d
Description The system failed to start PING because the circuit has not been created.
Severity LOG_ERR
Action Collect the output of the show tech-support and show circuit slot/port atm commands.

Create the ATM PVC (see the SmartEdge documentation for more information).

Restart the ATM process or reload the card (this action impacts service).

If the problem persists, contact customer support.

Arg #1 pvc info
Arg #2 hardware circuit ID
Arg #3 request cirucit ID

1.231   EVNT_ATM_PING_START3

Message start ping: PVC %s still has outstanding ping!
Description The system failed to start PING because there was a pending PING request in another CLI session.
Severity LOG_ERR
Action Collect the output of the show tech-support and show atm pvc slot port vpi vci detail commands.

Wait until the other PING sessions are finished or stop PING in the other CLI sessions.

Restart the ATM process or reload the ATM card (this action impacts service)

If the problem persists, contact customer support.

Arg #1 pvc info
Replaces "%s: PVC %s still has outstanding ping!"

arg1: function name

arg2: pvc info

1.232   EVNT_ATM_PING_STOP1

Message stop ping: unable to find ping data for %s
Description The system failed to stop PING becuase no PING data was found.

This error occurred because PING had not been started or the system detected corrupt database records.

Severity LOG_ERR
Action Collect the output of the show tech-support and show circuit slot/port atm commands.

Restart the ATM process or reload the card (this action impacts service).

If the problem persists, contact customer support.

Arg #1 pvc info
Replaces "%s: unable to find ping data for %s"

arg1: function name

arg2: pvc info

1.233   EVNT_ATM_PING_STOP2

Message stop ping: invalid OAM flow type %d
Description The system failed to stop PING because the OAM flow type was invalid.
Severity LOG_ERR
Action Collect the output of the show tech-support and show circuit slot/port atm commands.

Correct the OAM flow type (see the SmartEdge documentation for more information).

Restart the ATM process or reload the ATM card.

If the problem persists, contact customer support.

Arg #1 pvc info
Replaces "%s: invalid OAM flow type %d"

arg1: function name

arg2: OAM flow type

1.234   EVNT_ATM_PORTNUM_ERR

Message operation=%s INVALID port number %d for card_type %d
Description The specified port number is not supported by the card.
Severity LOG_ERR
Action Enter the show config atm, show hardware card slot, and show port slot/port detail commands and save the command output and log messages.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 port number
Arg #3 card type
Replaces "%s: INVALID port number %d for card_type %d"

arg1: function name

arg2: port

arg3: card type

1.235   EVNT_ATM_PORTRESCNG_ERR

Message operation=%s failed to update port resources for %s rc = %d
Description The system failed to update port resources when changing port attributes. This message occurred because there was insufficient memory to apply the change or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration and show port slot/port detail commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 port info
Arg #3 error code
Replaces "%s failed to update resources record for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.236   EVNT_ATM_PORTRESCRT_ERR

Message operation=%s failed to create port resources for %s rc = %d
Description The system failed to create a port. This message occurred because there were insufficient resources to add the port or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration, show port slot/port detail, and show memory commands and save the output.

Restart the RCM process.

Remove the port and reconfigure it.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 port info
Arg #3 error code
Replaces "%s failed to allocate port resources rc %d"

arg1: function name

arg2: error code

1.237   EVNT_ATM_PORTRESDEL_ERR

Message operation=%s failed to delete port resources for %s rc = %d
Description The system failed to delete port resources. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show configuration, show port slot/port detail, and show memory commands and save the output.

Restart the RCM process.

Remove the port and re-create it.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 port info
Arg #3 error code
Replaces "%s failed to delete port resource rc %d"

arg1: function name

arg2: error code

1.238   EVNT_ATM_PORTSIZE_ERR

Message operation=%s Unknown ATM port size %d
Description The system detected an invalid ATM port number. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show configuration command and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 port size
Replaces "Unknown ATM port size %d"

arg1: port size

1.239   EVNT_ATM_PORTTYPE_ERR

Message operation=%s Unknown ATM port type %d
Description The system detected an invalid ATM port type. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show configuration command and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 port type

1.240   EVNT_ATM_POUTGET_ERR

Message operation=%s scan for punchout failed for %s rc = %d
Description The system failed to identify an excluded PVC address in a range. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show config atm, show memory, and show atm memory commands and save the output and the log messages.

Restart the RCM or ATM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s: scan for punchout failed"

arg1: function name

1.241   EVNT_ATM_PROFCHG_ERR

Message operation=%s failed to apply dynamic profile attribute for %s rc = %d
Description The system failed to apply a dynamic profile to a PVC. This message occurred because there was insufficient memory to apply the new profile or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands, Save the command output and the log messages.

Refer to the SmartEdge documentation for more information.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to apply dynamic profile attribute rc %d"

arg1: function name

arg2: error code

1.242   EVNT_ATM_PROFDB1_ERR

Message operation=%s Failed to insert profile record 0x%x for %s rc=%d
Description The system failed to insert a profile record into the database. This message occurred because there was insufficient memory to insert the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory and show atm memory commands. Save the command output and the log messages.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 profile grid
Arg #3 pvc info
Arg #4 error code
Replaces ATM_MGR_LOG_ERR(EVL_PROV_IDX_NONE, CKT_HANDLE_INVALID,

"%s: failed to insert record for profile %s ",

__FUNCTION__, prof_req_p->prof_name);

1.243   EVNT_ATM_PROFDB2_ERR

Message operation=%s Failed to update profile record 0x%x for %s rc=%d
Description The system failed to insert a profile record into the database. This message occurred because there was insufficient memory to insert the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show atm memory and show memory commands. Save the output of the commands and the log messages.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 profile grid
Arg #3 pvc info
Arg #4 error code

1.244   EVNT_ATM_PROFDB3_ERR

Message operation=%s Failed to retrieve profile record 0x%x for %s rc=%d
Description The system failed to retrieve a profile record from the database. This message occurred because the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show atm memory, show memory, and show config atm commands. Save the command output and the log messages.

Restart the RCM process or remove the profile and re-create it.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 profile grid
Arg #3 pvc info
Arg #4 error code
Replaces "%s - Failed to retrieve profile record 0x%x for %s %d"

arg1: function name

arg2: profile grid

arg3: pvc info

arg4: error code

1.245   EVNT_ATM_PROFDB4_ERR

Message operation=%s Failed to remove profile record 0x%x for %s rc=%d
Description The system failed to remove a profile record from the database. This message occurred if the profile record does not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show atm memory, show memory, and show config atm commands. Save the command output and the log messages.

Restart the RCM process or remove the profile and re-create it.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 profile grid
Arg #3 pvc info
Arg #4 error code
Replaces "%s Failed to delete profile %s"

arg1: function name

arg2: profile name

1.246   EVNT_ATM_PROFDB5_ERR

Message operation=%s Failed to read profile record by name %s for %s rc=%d
Description The system failed to read a profile record by name. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show atm memory, show memory, and show config atm commands. Save the command output and the log messages.

Restart the RCM process or remove and re-create the profile.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 profile name
Arg #3 pvc info
Arg #4 error code
Replaces "failed to locate existing record for profile %s"

arg1: profile name

1.247   EVNT_ATM_PROFDYNDB1_ERR

Message operation =%s Failed to insert dynamic profile record for %s in the database rc=%d profile_grid: 0x%x
Description The system failed to insert a dynamic profile record into the database. This message occurred if the circuit record did not exist or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm memory, and show atm profile profile-name commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - Can't create RTDB profile with grid %#x"

arg1: function name

arg2: profile grid

1.248   EVNT_ATM_PROFDYNDB2_ERR

Message operation =%s Failed to update dynamic profile record for %s in the database rc=%d profile_grid: 0x%x
Description The system failed to update a dynamic profile record in the database. This message occurred because there was insufficient memory to update the profile record or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm memory, and show atm profile prof-name commands.

Restart the ATM and RCM processes

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Arg #4 profile grid
Replaces "%s - Can't create RTDB profile with grid %#x"

arg1: function name

arg2: profile grid

1.249   EVNT_ATM_PROFDYNDB3_ERR

Message operation =%s Failed to read dynamic profile record for %s in the database rc=%d profile_grid: 0x%x
Description The system failed to retrieve a dynamic profile record from the database. This message occurred if the record did not exist or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm memory, and show atm profile prof-name commands.

Restart the ATM and RCM processes.

Delete and re-create the profile (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Arg #4 profile grid
Replaces "%s: profile %#x not found\n"

arg1: function name

arg2: profile grid

1.250   EVNT_ATM_PROFDYNDB4_ERR

Message operation =%s Failed to remove dynamic profile record for %s in the database rc=%d profile_grid: 0x%x
Description The system failed to remove a dynamic profile record from the database. This message occurred if the record did not exist or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm memory, and show atm profile prof-name commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Arg #4 profile grid
Replaces "%s - fail to delete profile of grid %#x"

arg1: function name

arg2: profile grid

1.251   EVNT_ATM_PROFDYNDB5_ERR

Message operation=%s Failed to read dynamic profile record by name %s for %s rc=%d
Description The system failed to find a dynamic profile record (by profile name) in the database. This message occurred if the record did not exist or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm memory, and show atm profile prof-name commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 profile name
Arg #4 error code
Replaces "%s - error on retrieving dynamic profile '%s',rc = %d"

arg1: function name

arg2: profile name

arg3: error code

1.252   EVNT_ATM_PROFGRIDADDERR

Message operation=%s error creating grid for profile %s rc = %d
Description The system failed to create a grid for a profile. This message occurred because there was insufficient memory to add the profile or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration, show memory, and show atm memory commands. Save the output and the log messages.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 profile name
Arg #3 error code
Replaces "%s: error creating grid for profile %s"

arg1: function name

arg2: profile name

1.253   EVNT_ATM_PROFGRIDDELERR

Message operation=%s error deleting grid for profile %s rc = %d
Description The system failed to remove a profile grid from the database. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show configuration, show memory, and show atm memory commands. Save the output and the log messages.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 profile name
Arg #3 error code
Replaces "%s: error deleting grid for profile %s"

arg1: function name

arg2: profile name

1.254   EVNT_ATM_PROFWREDECCERR

Message operation=%s - Failed to free SAR WRED profile resources for %s %d
Description The system failed to free SAR WRED resources for an ATM profile. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Restart the RCM process or remove and reconfigure the ATM card (this action impacts service). If the problem persists, contact customer support.
Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Cannot free SAR WRED resources for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.255   EVNT_ATM_PROFWREDINCERR

Message operation=%s - Failed to allocate SAR WRED profile resources for %s %d
Description The system failed to allocate SAR WRED resources for a new profile attribute. The message occurred because no WRED resources were available or the system detected a corrupt database record.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Failed to allocate SAR WRED resources for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.256   EVNT_ATM_PROTCHK_ERR

Message operation=%s fail checking protection port rc = %d
Description The system failed to find a protection port record. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show configuration, show aps group detail, and show port slot/port detail commands. Save the output and the log messages.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s fail checking protion port"

arg1: function name

1.257   EVNT_ATM_PROTCNTGET_ERR

Message operation=%s unable to get pvc count for %s rc = %d
Description The system failed to obtain the PVC count for the specified slot. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show config atm, show memory, and show atm memory commands. Save the output and the log messages.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - unable to get pvc count for %s"

arg1: function name

arg2: pvc info

1.258   EVNT_ATM_PROTDUP_ERR

Message operation: %s aps protect keys duplicate failed rc %d
Description The system failed to duplicate a key for an APS protect port. This message occurred because there was a resource error or the system detected a corrupt database record.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and recent logs.

Restart the RCM process.

Re-create the protect port.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s - no aps protect keys duplicate failed %d"

arg1: function name

arg2: error code

1.259   EVNT_ATM_PROT_ENCAP1_ERR

Message %s: new encap %s detected for multi encap protocol of %s
Description The system found an invalid protocol encapsulation type while activating CCOD PVCs. The valid protocol encapsulation is MULTI_PPPOE. This is an abnormal failure and the PVC remains in that state.
Severity LOG_ERR
Action Verify the PVC and range records by entering the show config atm and show atm pvc slot/port vpi vpi vci vci detail commands.

Try deleting and re-creating the PVC to reinitialize it.

If the problem persists, save the command output and log files and contact customer support.

Arg #1 current operation
Arg #2 encaps name
Arg #3 pvc info

1.260   EVNT_ATM_PROT_ENCAP2_ERR

Message %s: protocol encaps %d not supported
Description The system found an invalid protocol encapsulation type when activating CCOD PVCs.

This is an abnormal failure, but the CCOD activation will abort normally and return to the dormant state.

Severity LOG_ERR
Action Verify the encapsulation type in the profile on the CCOD PVC by entering the show config atm and show atm profile prof-name commands.

If the CCOD PVC is in the idle or active state, you can enter the show atm pvc command to check the protocol encapsulation.

If the CCOD PVC is in the dormant state, the protocol will not be present.

If the protocol encapsulation type is invalid, correct it or contact customer support for further investigation.

Arg #1 current operation
Arg #2 encapsulation type

1.261   EVNT_ATM_PROTOGET_ERR

Message operation=%s cannot find protocol encap %x for %s
Description The system failed to find a protocol circuit based on encapsulation. This message occurred because the protocol circuit does not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration command and save the output.

Restart the RCM or ATM process.

Remove and re-create the protocol (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 encapsulation
Arg #3 PVC info
Replaces "%s - cannot find protocol encap %x for %s"

arg1: function name

arg2: encapsulation type

arg3: range info

1.262   EVNT_ATM_PROTOITFUB_ERR

Message operation=%s proto unbind interface failed for %s rc = %d
Description The system failed to unbind a protocol interface from Interface Manager. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show config atm, show memory, and show atm memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - proto unbind interface failed, rc = %#x"

arg1: function name

arg2: error code

1.263   EVNT_ATM_PROTORESADDERR

Message operation=%s fail to allocate protocol resource for %s rc = %d
Description The system failed to allocate resources for the protocol circuit. This message occurred because there was insufficient memory to create the protocol circuit or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show memory, and show atm memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s failed to allocated protocol resources rc %d"

arg1: function name

arg2: error code

1.264   EVNT_ATM_PROTORESDECERR

Message operation=%s failed to free protocol resources for %s rc = %d
Description The system failed to free protocol resources for circuits. This message occurred because the system failed to decrement the cct_in_slot (number of circuits per slot) count in the database.
Severity LOG_ERR
Action Log messages associated with this event were produced before it occurred. See the instructions about the event in the log.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to free protocol resources protect_port rc %d"

arg1: function name

arg2: error code

1.265   EVNT_ATM_PROTORESDEC_ERR

Message operation=%s fail to decrement protocol circuit count for %s rc = %d
Description The system failed to decrement the protocol circuit count when removing protocols from the PVC. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show config atm, show memory, and show atm memory commands and save the output and the log messages.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s failed to delete protocol resource rc %d"

arg1: function name

arg2: error code

1.266   EVNT_ATM_PROTORESINCERR

Message operation=%s failed to allocate protocol resources for %s rc = %d
Description The system failed to allocate protocol resources for circuits. This message occurred because the cct_in_slot (number of circuits per slot) resource allocation failed.
Severity LOG_ERR
Action Log messages associated with this event were produced before it occurred. See the instructions about the event in the log.

Otherwise, restart the RCM process.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to allocate protocol resources protect_port rc %d"

arg1: function name

arg2: error code

1.267   EVNT_ATM_PRTATTRCNG_ERR

Message operation=%s failed to apply port attribute change for %s %d
Description The system failed to apply new port attributes. This message occurred because there was insufficient memory to apply the change or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show atm memory, and show memory commands. Save the output and the log messages.

Restart the RCM process or remove and re-create the port (this action impacts service). If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 channel info
Arg #3 error code
Replaces "%s failed to apply port attribute change for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.268   EVNT_ATM_PUNCHOUT_ERR

Message operation =%s punchout remove failed for %s from range %s, rc = %d
Description The system failed to add a static PVC in an existing CCOD range. This message occurred because the PVC failed to reference the new circuit or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm pvc slot/port vpi vpi vci vci detail, and show atm pvc detail commands.

Restart the ATM and RCM processes

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 range info
Arg #4 error code
Replaces "%s - punchout remove failed for %s from range %s, rc = %d"

arg1: function name

arg2: pvc info

arg3: range info

arg4: error code

1.269   EVNT_ATM_PVCBIND_ERR

Message operation=%s process bind failed for %s rc = %d
Description The system failed to process a PVC binding. This message occurred because there was a resource error or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show memory, and show atm memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - Process bind failed %d"

arg1: function name

arg2: error code

1.270   EVNT_ATM_PVCBWCNTCRT_ERR

Message operation=%s failed to create bandwidth resources for %s rc %d
Description The system failed to create bandwidth resources when creating an ATM port. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to create bandwidth resources for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.271   EVNT_ATM_PVCBWCNTDEC_ERR

Message operation=%s failed to free bandwidth resources for %s rc %d
Description The system failed to decrement the bandwidth count when removing static PVCs or deactivating CCOD PVCs. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action If it is a static PVC, restart the RCM process. If it is a CCOD PVC, restart the ATMd process. If the problem persists, contact customer support.
Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to free bandwidth resource for %s"

arg1: function name

arg2: pvc info

1.272   EVNT_ATM_PVCBWCNTDEL_ERR

Message operation=%s failed to delete bandwidth resources for %s rc %d
Description The system failed to delete a bandwidth count record when removing an ATM port. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s fail to delete bandwidth resources for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.273   EVNT_ATM_PVCBWCNTINC_ERR

Message operation=%s failed to allocate bandwidth resources for %s rc %d
Description The system failed to increment the bandwidth count when configuring static PVCs or activating CCOD PVCs. This message occurred because the bandwidth resources had reached the maximum limit or the system detected a corrupt database record.
Severity LOG_ERR
Action If it is a static PVC, restart the RCM process. If it is a CCOD PVC, restart the ATMd process. If the problem persists, contact customer support.
Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to allocate bandwidth resource for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.274   EVNT_ATM_PVCCARDCRT_ERR

Message operation=%s failed to create common PVC card resource for %s rc %d
Description The system failed to create resource records when creating an ATM card.
Severity LOG_ERR
Action Log messages associated with this event were produced before it occurred. See the instructions about the event in the log.

Otherwise, restart the RCM process.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code

1.275   EVNT_ATM_PVC_CREATE

Message %s: pvc create failure for %s, rc=%#x
Description The ATMd process failed to create a PVC (static or CCOD).
Severity LOG_ERR
Action Log messages associated with this failure were produced before this event occurred. See the instructions about the event in the log. Depending on the scenario, the message was triggered by one of the following causes:

1) ccod act - CCOD activation returned a circuit to dormant state.

2) pvc create - the PVC was cleanly removed.

3) range create - a partial range was created and the rest were aborted.

Arg #1 current operation
Arg #2 pvc info
Arg #3 return code

1.276   EVNT_ATM_PVCDB1

Message operation='%s' Failed to insert PVC record %s into database rc =%d
Description The system failed to insert a PVC record into the database. This message occurred because there was insufficient memory to insert the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show process atm, and show config commands. Save the output and the logs.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 the error code returned from database
Replaces "%s - RDB insert PVC failed %d"

arg1: function name

arg2: error code

1.277   EVNT_ATM_PVCDB2

Message operation='%s' Failed to update PVC record %s in database rc=%d
Description The system failed to update a PVC record in the database. This message occurred because there was insufficient memory to update the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show process atm, and show config commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 the error code returned from database
Replaces "%s - Update PVC failed %d"

arg1: function name

arg2: error code

1.278   EVNT_ATM_PVCDB3

Message operation ='%s' Failed to read PVC record %s from database rc=%d
Description The system failed to read a PVC record in the database. This message occurred if the specified record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Verify that the record was created by entering the show config atm command.

If the record does not exist, create the record.

Otherwise, restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 the error code returned from database
Replaces "%s - Failed to read PVC config record for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.279   EVNT_ATM_PVCDB4

Message operation='%s' Failed to remove PVC record %s in database rc=%d
Description The system failed to remove a PVC record from the database. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Verify that the record was created by entering the show config atm command.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 the error code returned from database
Replaces "%s: failed to delete %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.280   EVNT_ATM_PVC_DEL

Message %s: pvc remove failure for %s, rc=%#x
Description The ATMd process failed to delete a PVC. The log message indicates the scenario, which can be one of the following:

1) chan pvc remove - deleting a port and everything under it.

2) vp pvc remove - deleting a VP and everything under it.

3) pvc del - deleting a PVC.

4) eccod deact - Deactivating an enhanced CCOD PVC.

5) ccod deact - Deactivating a CCOD PVC.

Severity LOG_ERR
Action Restart the ATMd process to reset this failure.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 return code

1.281   EVNT_ATM_PVCDEL_ERR

Message operation=%s PVC delete failed for %s rc = %d
Description The system failed to delete a PVC record from the database when removing a PVC configuration. This message occurred because there was a resource error or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show memory, and show atm memory commands. Save the output and the log messages.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - PVC delete failed %d"

arg1: function name

arg2: error code

1.282   EVNT_ATM_PVCDESPDEL_ERR

Message operation=%s Failed to delete pvc description grid for %s rc = %d
Description The system failed to delete a PVC description. This message occurred if the description record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show memory, and show atm memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s: Failed to delete pvc description grid"

arg1: function name

1.283   EVNT_ATM_PVCDYNDB1_ERR

Message operation =%s Failed to insert dynamic PVC record for %s in the database rc=%d
Description The system failed to insert a dynamic PVC record into the database. This message occurred because there was insufficient memory to insert the record or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, and show atm memory commands.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s dyn pvc insert failed rc=%#x, for %s"

arg1: function name

arg2: error code

arg3: pvc info

1.284   EVNT_ATM_PVCDYNDB2_ERR

Message operation =%s Failed to update dynamic PVC record for %s in the database rc=%d
Description The system failed to update a dynamic PVC record in the database. This message occurred because there was insufficient memory to update the record or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, and show atm memory commands.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s dyn pvc update failed rc=%#x, for %s"

arg1: function name

arg2: error code

arg3: pvc info

1.285   EVNT_ATM_PVCDYNDB3_ERR

Message operation =%s Failed to get dynamic PVC record for %s in the database rc=%d
Description The system failed to retrieve a dynamic PVC record from the database. This message occurred if the record did not exist or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support and show process atm diag detail commands.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - dyn pvc get failed for %s, rc = %d"

arg1: function name

arg2: pvc info

arg3: error code

1.286   EVNT_ATM_PVCDYNDB4_ERR

Message operation =%s Failed to remove dynamic PVC record for %s in the database rc=%d
Description The system failed to remove a dynamic PVC record from the database. This message occurred if the record did not exist or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, and show atm pvc detail commands.

Restart the ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s: dyn pvc delete failed rc=%#x, %s"

arg1: function name

arg2: error code

arg3: pvc info

1.287   EVNT_ATM_PVCDYNFREE_ERR

Message operation=%s Failed to free resource for %s %d
Description The system failed to free resources when removing a PVC or CCOD PVC configuration. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show config atm command and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s failed to delete PVC resource rc %d"

arg1: function name

arg2: error code

1.288   EVNT_ATM_PVCIPCNTCRT_ERR

Message operation=%s failed to create IP count resources for %s rc %d
Description The system failed to create an IP count record when the system was booting or after a process was restarted. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to create IP Host resources for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.289   EVNT_ATM_PVCIPCNTDEC_ERR

Message operation=%s failed to free IP count resources for %s rc %d
Description The system failed to decrement the bandwidth count when removing static PVCs. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action If it is a static PVC, restart the RCM process. If the problem persists, contact customer support.
Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to free iphost resource for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.290   EVNT_ATM_PVCIPCNTDEL_ERR

Message operation=%s failed to delete IP count resources for %s rc %d
Description The system failed to delete the global IP count. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s failed to delete IP Host resources for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.291   EVNT_ATM_PVCIPCNTINC_ERR

Message operation=%s failed to allocate IP count resources for %s rc %d
Description The system failed to increment the bandwidth resources count when configuring static PVCs. This message occurred because the IP count reached the maximum limit or the system detected a corrupt database record.
Severity LOG_ERR
Action If it is a static PVC, restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to allocate iphost resource for %s rc %d",

arg1: function name

arg2: pvc info

arg3: error code

1.292   EVNT_ATM_PVCKEYDB1ERR

Message operation=%s Failed database multikey insert for %s rc = %#x
Description The system failed to insert a key for the PVC in the database. This message occurred because there was insufficient memory to update the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show atm memory, and show config atm commands. Save the output and the logs.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "Failed database multikey insert rc = %#x"

arg1: error code

1.293   EVNT_ATM_PVCPORFCHG_ERR

Message operation=%s Failed to apply new profile attribute to %s rc %d
Description The system failed to apply new profile attributes to the PVC.
Severity LOG_ERR
Action Log messages associated with this resource type were produced before this event occurred. See the instructions about the event in the log.

Otherwise, restart the RCM process.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s Failed to apply new profile attribute to protect port %d"

arg1: function name

arg2: error code

1.294   EVNT_ATM_PVCPORTCRT_ERR

Message operation=%s failed to create port resource for %s rc %d
Description The system failed to create resource records when creating an ATM port.

This message occurred if one of the vp_in_port (number of VPs per port) or bandwidth resources records could not be created.

Severity LOG_ERR
Action Log messages associated with this resource type were produced before this event occurred. See the instructions about the event in the log.

Otherwise, restart the RCM process.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to allocate PVC port resources for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.295   EVNT_ATM_PVCPOUTDECERR

Message operation=%s Failed to free PVC resource for punch out %s - %d
Description The system failed to free resources for an excluded PVC in a range. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show config atm, show memory, and show atm memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code

1.296   EVNT_ATM_PVCPOUTINCERR

Message operation=%s Failed to allocate PVC resource for punch out %s - %d
Description The system failed to allocate PVC resources for an static PVC created in an existing CCOD range. This message occurred because there was insufficient memory to add the PVC or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show memory, and show atm memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - Failed to allocate PVC resource for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.297   EVNT_ATM_PVC_PPA1_ERR

Message %s: failed to create entry on PPA for %s, L1 const cct %s, vc handle %d rc= %d
Description The system failed to create a CCOD PPA listener entry in the database.

This error may be due to an invalid parameter condition.

Severity LOG_ERR
Action Verify that the PVC is still valid by entering the show atm pvc slot/port vpi vpi vci vci detail command.

Creating and deleting the PVC may restore it to the dormant state.

If the problem persists, contact customer support

Arg #1 current operation
Arg #2 pvc info
Arg #3 circuit
Arg #4 vc handle
Arg #5 error code
Replaces "%s - failed to open PPA channel for %s."

arg1: function name

arg2: pvc info

1.298   EVNT_ATM_PVC_PPA2_ERR

Message %s: failed to delete entry on PPA for %s, L1 const cct %s, vc handle %d
Description The system failed to delete a CCOD PPA listener record when shutting down or removing a CCOD PVC. The error may be caused by an invalid parameter condition.
Severity LOG_ERR
Action If this is a shutting down operation, try creating and deleting the PVC to manually return the CCOD PVC to the dormant state.

If the PVC was removed, there is nothing to clean up.

Arg #1 current operation
Arg #2 pvc info
Arg #3 circuit
Arg #4 vc handle

1.299   EVNT_ATM_PVC_PPA3_ERR

Message %s: failed to set ppa listener rc=%d, for %s
Description The system failed to set or unset the CCOD PPA listener (see EVNT_ATM_PVC_PPA1_ERR and EVNT_ATM_PVC_PPA2_ERR).

This message indicates the calling function:

1) ccod act - error during CCOD activation

2) ccod aaa - error during AAA authorization

Severity LOG_EMERG
Action Follow the steps in EVNT_ATM_PVC_PPA1_ERR or EVNT_ATM_PVC_PPA2_ERR.
Arg #1 current operation
Arg #2 error code
Arg #3 pvc info

1.300   EVNT_ATM_PVCPROFUPERR

Message operation=%s failed to update PVC/VP profile for %s rc = %d
Description The system failed to apply a dynamic profile to the specified PVC. This message occurred because there were insufficient resources to apply the change, the profile had invalid attributes, or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show memory, and show atm memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s failed to update PVC profile for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.301   EVNT_ATM_PVCPRTPTCRTERR

Message operation=%s failed to create protect port resource for %s rc %d
Description The system failed to allocate resources for the protect port when configuring APS. This message occurred because the resources on the protect card or port are full or the system detected a corrupt database record.
Severity LOG_ERR
Action Log messages associated with this event were produced before it occurred. See the instructions about the event in the log.

Restart the RCM process or remove and re-create the ATM card (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to create protect port resource %d"

arg1: function name

arg2: error code

1.302   EVNT_ATM_PVCPRTPTDELERR

Message operation=%s failed to delete protect port resource for %s rc %d
Description The system failed to free protect port resources when configuring APS. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Log messages associated with the specific resources were produced before this event occurred. See the instructions about the event in the log.

Restart the RCM process or remove and re-create the ATM card (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s failed to delete protect port resource %d"

arg1: function name

arg2: error code

1.303   EVNT_ATM_PVCRECSET_ERR

Message operation=%s Cannot set PVC record %s rc = %d
Description The system failed to copy a database record. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show config atm, show memory, and show atm memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - Cannot set PVC record %s"

arg1: function name

arg2: pvc info

1.304   EVNT_ATM_PVCRESADDERR

Message operation=%s fail to allocate PVC resources for %s rc %d
Description The system failed to allocate resources for the specified PVCs. This message occurred because PVC resource allocation failed.
Severity LOG_ERR
Action Log messages associated with this resource type were produced before this event occurred. See the instructions about the event in the log.
Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s fail to allocate PVC resources for %s"

arg1: function name

arg2: pvc info

1.305   EVNT_ATM_PVCRESADD_ERR

Message operation=%s Failed to allocate resource for %s %d
Description The system failed to allocate resources for PVCs. The message occurred because there was insufficient memory to add the new PVCs or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show memory, and show atm memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - PVC resource allocate failed %d"

arg1: function name

arg2: pvc info

1.306   EVNT_ATM_PVCRESCRT_ERR

Message "%s failed to create IP Host Count record for %s rc %d"
Description The system failed to create IP host count records when creating an ATM card. This message occurred because there was insufficient memory to create the records or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show atm memory, and show memory commands and save the output.

Restart the RCM process or remove and re-create the card (this action impacts service). If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to create IP Host Count record for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.307   EVNT_ATM_PVCRESDEC_ERR

Message operation=%s Failed to free PVC resource for for %s rc %d
Description The system failed to free PVC resources when removing PVCs or deactivating CCOD PVCs. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show config atm, show atm memory, and show memory commands and save the output.

Restart the RCM and ATM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Failed to release PVC resource for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.308   EVNT_ATM_PVCRESDELERR

Message operation=%s fail to free PVC resources for %s rc %d
Description The system failed to remove resources for the PVCs. This message occurred because PVC resource deallocation failed.
Severity LOG_ERR
Action Log messages associated with this event were produced before it occurred. See the instructions about the event in the log.
Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to free PVC resources for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.309   EVNT_ATM_PVCRESDEL_ERR

Message operation=%s Failed to delete PVC resource for %s rc %d
Description The system failed to delete PVC resource records when removing an ATM card configuration. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show config atm, show atm memory, and show memory commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s fail to delete PVC resources for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.310   EVNT_ATM_PVCRESERR

Message operation: '%s' PVC resource allocate failed for %s profile grid: 0x%x rc=0x%x
Description The system failed to allocate PVC resources. This message occurred because PVC resource allocation failed.
Severity LOG_ERR
Action Refer to EVNT_ATM_PVCXXRESERR for additional details.
Arg #1 current operation
Arg #2 the PVC information
Arg #3 tHe profile grid for the PVC
Arg #4 the error return code from the previous function

1.311   EVNT_ATM_PVCRESFREE_ERR

Message "operation=%s Failed to free resource for %s %d"
Description The system failed to remove resources when removing a PVC or CCOD PVC configuration. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show config atm command and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to delete PVC resource rc %d"

arg1: function name

arg2: error code

1.312   EVNT_ATM_PVCRESINC_ERR

Message operation=%s Failed to allocate PVC resource for for %s rc %d
Description The system failed to allocate PVC resources when creating PVCs. This message occurred because there was insufficient memory to update the PVC or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show atm memory, and show memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Failed to allocate PVC resource for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.313   EVNT_ATM_PVCRESRECRERR

Message operation=%s failed to recover PVC resources for %s rc = %d
Description The system failed to recover PVC resources after restarting a process. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show config atm, show atm memory, and show memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - failed to recover resources for %s"

arg1: function name

arg2: pvc info

1.314   EVNT_ATM_PVCRSRECARDERR

Message operation=%s - PVC Resource Library failed to re-create card for %s %d
Description The system failed to initialize the PVC resource library after reloading a card or restarting a process. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Log messages associated with this event were produced before it occurred. See the instructions about the event in the log.

Restart the RCM process or remove and re-create the ATM card (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - PVC Resource Library failed to re-create card for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.315   EVNT_ATM_PVCRSREITERR

Message operation=%s - PVC Resource Library failed to initialize rc %d
Description The system failed to initialize the PVC resource library.

This error occurred because resources described in one of the following messages failed to initialize:

EVNT_ATM_CCTCNTINIT_ERR

EVNT_ATM_VCCARDINIT_ERR

EVNT_ATM_VCVPINIT_ERR

EVNT_ATM_BWCNTINIT_ERR

EVNT_ATM_VPPORTINIT_ERR

EVNT_ATM_OAMCNTINIT_ERR

EVNT_ATM_IPCNTINIT_ERR

Severity LOG_ERR
Action Restart the RCM process or remove and re-create the ATM card (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s - PVC Resource Library failed to initialize %d tmp_rc"

arg1: function name

arg2: error code

1.316   EVNT_ATM_PVCSET_ERR

Message operation=%s Failed to create PVC for %s rc %d
Description The ATMd process failed to set the PVC record. This message occurred because of a resources error or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration, show port slot/port detail, and show tech-support commands and save the output and the log files.

Restart the RCM and ATM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s: cfg range failed %#x"

arg1: function name

arg2: error code

1.317   EVNT_ATM_PVC_UPDATE

Message %s: pvc update failure for %s rc=%#x
Description The ATMd process failed to modify the PVC so the latest provision change was not applied.
Severity LOG_ERR
Action See the log message about this event for the cause of the failure and instructions to resolve it.

Restart the ATMd process to resynchronize the circuit information with the actual PVC state.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code

1.318   EVNT_ATM_PVCWREDUP_ERR

Message operation =%s Failed to update ATMWFQ for %s rc=%d
Description The system failed to apply a new ATMWFQ attribute to the PVC. The message occurred because the ATMWFQ attributes were invalid or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm pvc slot/port vpi vpi vci vci detail, and show qos policy atmwfq atmwfq-name commands.

Restart the ATM and RCM processes.

Bind another QoS ATMWFQ to the PVC (see the SmartEdge documentation for more information).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - add dyn-profile failed for %s, rc=%d"

arg1: function name

arg2: pvc info

arg3: error code

1.319   EVNT_ATM_QOSBIND_ERR

Message operation=%s failed QOS binding %#x, no_mode %d rc = %d
Description The system failed to bind a QoS policy to a PVC. The message occurred because there was insufficient memory to apply the QoS attribute or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration, show atm memory, and show memory commands and save the output.

Restart the RCM or QoS process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 QoS policy name
Arg #3 operation mode
Arg #4 error code
Replaces "%s - failed QOS binding %#x, no_mode %d"

arg1: function name

arg2: atmwfq name

arg3: mode

1.320   EVNT_ATM_QOSCCT_ERR

Message operation=%s Failed QoS child cct update (qos_mgr error = %d)
Description The system failed to update a QoS circuit. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show config atm, show atm memory, and show memory commands and save the output.

Restart the RCM or QoS process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "Failed QoS child cct update (qos_mgr error = %d)"

arg1: error code

1.321   EVNT_ATM_QOSCMAPGETERR

Message operation=%s Couldn't find the egress class-map with grid %x rc = %d
Description QoS Manager failed to find the egress class map. This message occurred if the egress class map did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration, show atm memory, and show memory commands and save the output.

Restart the RCM or QoS process.

Remove and re-create the egress class map.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 egress class-map grid
Arg #3 error code

1.322   EVNT_ATM_QOSCMAPREF1ERR

Message operation=%s fail to reference class-map with grid %x rc = %d
Description QoS Manager failed to reference a class map. This message occurred if the class map did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration command and save the output.

Restart the RCM or QoS process.

Remove and re-create the class map.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 class-map grid
Arg #3 error code
Replaces "fail to reference class-map with grid %x"

arg1: class map grid

1.323   EVNT_ATM_QOSCMAPREF2ERR

Message operation=%s fail to de-reference class-map with grid %x rc = %d
Description QoS Manager failed to dereference a class map. This message occurred because the class map does not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show configuration command and save the output.

Restart the RCM or QoS process.

Remove and re-create the class map.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 class-map grid
Arg #3 error code
Replaces "fail to de-reference class-map with grid %x"

arg1: clp grid

1.324   EVNT_ATM_RDBDEL_ERR

Message operation=%s rdb delete failed: %d
Description The system failed to delete a record from the database. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and log files.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s: rdbDelete p=%d/%d vpi=%d"

arg1: function name

arg2: slot

arg3: port

arg4: vpi

1.325   EVNT_ATM_RDBITER_ERR

Message operation=%s failed to create iterator error %d
Description The system failed to create an iterator to search records.

This message occurred because of database corruption.

Severity LOG_ERR
Action Enter the show config atm, show atm memory, and show memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s: failed to create iterator error %d"

arg1: function name

arg2: error code

1.326   EVNT_ATM_RDBKEY_ERR

Message operation=%s rdb insert key fail: %d
Description The system failed to insert a key in the database. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and the log files.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s: rdbInsertMultiKey w=%d/%d p=%d/%d vpi=%d"

arg1: function name

arg2: min slot

arg3: min port

arg4: max slot

arg5: max port

arg6: vpi

1.327   EVNT_ATM_RECOVBIND_ERR

Message operation=%s failed to initialize the ATM binding grid space rc %d
Description The system failed to recover an ATM binding after restarting a process. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and recent logs.

Restart the RCM process.

Re-create the PVC binding.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s - failed to initialize the ATM binding grid space: %d"

arg1: function name

arg2: error code

1.328   EVNT_ATM_RECOVCHAN_ERR

Message operation=%s failed to re-populate local database from channel records rc %d
Description The system failed to recover an ATM port after restarting a process. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and recent logs.

Restart the RCM process.

Re-create the ATM port.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s - failed to re-populate local database from channel records: %d"

arg1: function name

arg2: error code

1.329   EVNT_ATM_RECOVDESC_ERR

Message operation=%s failed to recover pvc description grids rc %d
Description The system failed to recover an ATM PVC description after restarting a process. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and recent logs.

Restart the RCM process.

Re-create the PVC description.

If the problem persists, contact customer support

Arg #1 current operation
Arg #2 error code
Replaces "%s - failed to recover pvc description grids: %d"

arg1: function name

arg2: error code

1.330   EVNT_ATM_RECOVDYN_ERR

Message operation=%s failed to re-init dynamic resources rc %d
Description The system failed to recover ATM dynamic resources after restarting a process. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and recent logs.

Restart the RCM or ATM process.

Reapply the dynamic attributes by deactivating the CCOD PVC and reactivating it.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s - failed to re-populate local database from PVC records: %d"

arg1: function name

arg2: error code

1.331   EVNT_ATM_RECOVERCMN_ERR

Message operation=%s failed to re-initialize the ATM common resource library rc %d
Description The system failed to reinitialize the ATM common resource library.

This message occurred because of database corruption

Severity LOG_ERR
Action Enter the show configuration, show atm memory, and show memory commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s - failed to re-initialize the ATM common resource library"

arg1: function name

1.332   EVNT_ATM_RECOVERCTL_ERR

Message operation=%s failed to recover card records from CTL manager rc %d
Description The system failed to recover a card record from the card manager. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show configuration, show atm memory, and show memory commands and save the output.

Restart the RCM process and reload the card by entering the reload card slot command.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s - failed to recover card records from CTL manager: "

arg1: function name

1.333   EVNT_ATM_RECOVERVP_ERR

Message operation=%s failed to re-populate local database from VP records rc %d
Description The system failed to recover an ATM VP after restarting a process. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and the log files.

Restart the RCM process.

Re-create the ATM VP.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s - failed to re-populate local database from VP records: %d"

arg1: function name

arg2: error code

1.334   EVNT_ATM_RECOVIP_ERR

Message operation=%s Failed to re-populate iphost count rc %d
Description The system failed to recover the ATM IP host count after restarting a process. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and log files.

Restart the RCM and ATM processes.

Reconfigure the IP host.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s - Failed to re-populate iphost count: %d"

arg1: function name

arg2: error code

1.335   EVNT_ATM_RECOVLIT_ERR

Message operation=%s failed to re-populate local database from CCOD listener PVCs rc %d
Description The system failed to recover the CCOD PVC count after restarting a process. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and the log files.

Restart the RCM and ATM processes.

Re-create the CCOD range or reload the card.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s - failed to re-populate local database from CCOD listener PVCs: %d"

arg1: function name

arg2: error code

1.336   EVNT_ATM_RECOVPROF_ERR

Message operation=%s failed to recover ATM profile grids rc %d
Description The system failed to recover an ATM profile grid after restarting a process. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and recent logs.

Restart the RCM process.

Re-create the profile.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s - failed to recover ATM profile grids: %d"

arg1: function name

arg2: error code

1.337   EVNT_ATM_RECOVPVC_ERR

Message operation=%s failed to re-populate local database from PVC records rc %d
Description The system failed to recover an ATM PVC after restarting a process. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and recent logs.

Restart the RCM process.

Re-create the ATM PVC.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s - failed to re-populate local database from PVC records: %d"

arg1: function name

arg2: error code

1.338   EVNT_ATM_RECOVRNG_ERR

Message operation=%s failed to re-populate local database from PVC range records rc %d
Description The system failed to recover an ATM PVC range after restarting a process. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and recent logs.

Restart the RCM process.

Re-create the ATM PVC range.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s - failed to re-populate local database from PVC range records: %d"

arg1: function name

arg2: error code

1.339   EVNT_ATM_RESPROFCHGERR

Message operation=%s Failed to apply new profile record 0x%x for %s rc=%d
Description The system failed to apply a new profile on a PVC. This message occurred because there were insufficient resources to apply the new profile attribute or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm and show atm profile commands and save the output.

Restart the RCM process or remove the profile and re-create it.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 profile grid
Arg #3 pvc info
Arg #4 error code
Replaces "%s - Failed to apply new profile record 0x%x for %s %d"

arg1: function name

arg2: profile grid

arg3: pvc info

arg4: error code

1.340   EVNT_ATM_RESPROFDELERR

Message operation=%s Failed to delete profile references to WRED profile grid 0x%x rc -%d
Description The system failed to remove profile resources. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show config atm and show atm profile commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 profile grid
Arg #3 error code
Replaces "%s - Failed to delete profile references to WRED profile grid 0x%x rc -%d"

arg1: function name

arg2: profile grid

arg3: error code

1.341   EVNT_ATM_RESWREDDELERR

Message operation=%s Failed to create PVC resource for %s rc %d
Description The system failed to create PVC resource records when creating an ATM card.

This message occurred because there was insufficient memory to create the PVC-related resources or the system detected a corrupt database record.

Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands. Save the output of the commands and the log files.

Restart the RCM process or remove and re-create the card.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to create IP Host Count record for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.342   EVNT_ATM_RNGDB1_ERR

Message operation=%s Failed to insert range record %s into database rc =%d
Description The system failed to insert the range record into the database. This message occurred because there was insufficient memory to update the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands. Save the output of the commands and the log files.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - RDB insert PVC failed rc=%d"

arg1: function name

arg2: error code

1.343   EVNT_ATM_RNGDB2_ERR

Message operation=%s Failed to update range record %s into database rc =%d
Description The system failed to update a range record in the database. This message occurred because there was insufficient memory to update the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm, show memory, and show atm memory commands. Save the output of the commands and the log files.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - Update PVC failed rc=%d"

arg1: function name

arg2: error code

1.344   EVNT_ATM_RNGDB3_ERR

Message operation=%s Failed to read range record %s into database rc =%d
Description The system failed to read the range record from the database. This message occurred if the range record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show atm memory, and show memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "Attempt to create a protocol cct on a non-existing cct: %s"

arg1: circuit

1.345   EVNT_ATM_RNGDB4_ERR

Message operation=%s Failed to remove range record %s into database rc =%d
Description The system failed to remove a range record from the database. This message occurred if the range record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show atm memory, and show memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - failed to delete range record %d"

arg1: function name

arg2: error code

1.346   EVNT_ATM_RNGDB5_ERR

Message operation=%s Failed to insert range cct for %s into database rc =%d
Description The system failed to insert a PVC range in the database. This message occurred if the range record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show atm memory, and show memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "Failed database multikey insert (rc = %d)"

arg1: error code

1.347   EVNT_ATM_RNGDEL_ERR

Message operation=%s failed to delete PVC range for %s rc = %d
Description The system failed to delete a PVC range from the database. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show config atm, show atm memory, and show memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s - failed to delete PVC range %s %d/%d"

arg1: function name

arg2: pvc info

arg3: circuit

arg4: vpi

arg5: vci

1.348   EVNT_ATM_RNGDYNDB1_ERR

Message operation =%s Failed to insert dynamic range record for %s in the database rc=%d
Description The system failed to insert a dynamic range record into the database. This message occurred because there was insufficient memory to insert the record or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, and show atm memory commands.

Restart the ATM and RCM processes.

Remove and re-create the range record.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 range info
Arg #3 error code

1.349   EVNT_ATM_RNGDYNDB2_ERR

Message operation =%s Failed to update dynamic range record for %s in the database rc=%d
Description The system failed to update a dynamic range record into the database. This message occurred because there was insufficient memory to insert the record or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, and show atm pvc detail commands.

Restart the ATM and RCM processes.

Remove and re-create the range record.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 range info
Arg #3 error code
Replaces "%s dynamic range record update failed for %s rc=%d"

arg1: function name

arg2: pvc info

arg3: error code

1.350   EVNT_ATM_RNGDYNDB3_ERR

Message operation =%s Failed to get dynamic range record for %s in the database rc=%d
Description The system failed to read a dynamic range record from the database. This message occurred if the record did not exist or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, and show atm pvc detail commands.

Restart the ATM and RCM processes.

Remove and re-create the range record.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 range info
Arg #3 error code
Replaces "%s: unable to find PVC %s"

arg1: function name

arg2: pvc info

1.351   EVNT_ATM_RNGDYNDB4_ERR

Message operation =%s Failed to remove dynamic range record for %s in the database rc=%d
Description The system failed to remove a dynamic range record from the database. This message occurred if the record did not exist or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, and show atm pvc detail commands.

Restart the ATM and RCM processes.

Remove and re-create the range record.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 range info
Arg #3 error code

1.352   EVNT_ATM_RNG_PPA1_ERR

Message %s: failed to create PPA range for %s
Description The system failed to set the CCOD PPA listener for a range.

This failure can occur when the PPA is down or a parameter condition is incorrect.

Severity LOG_ERR
Action Verify the range by entering the show atm pvc slot/port vpi vpi vci vci command.

Delete and re-create the range.

Contact customer support for further investigation.

Arg #1 current operation
Arg #2 pvc info
Replaces "%s - failed to create PPA range for %s"

arg1 - function name

arg2 - pvc info

1.353   EVNT_ATM_RNG_PPA2_ERR

Message %s: failed to delete PPA range for %s
Description The system failed to unset the CCOD PPA listener during a range removal or when shutting a range.

The failure is caused by an invalid parameter condition.

Severity LOG_ERR
Action Verify the range by entering the show atm pvc slot/port vpi vpi vci vci command.

Delete and re-create the range.

Arg #1 current operation
Arg #2 pvc info

1.354   EVNT_ATM_RSDBINIT_ERR

Message operation=%s Resource Database failed to initialize %d
Description The system failed to initialize the resource database.

This message occurred because the system detected corrupt database records.

Severity LOG_ERR
Action Enter the show config atm, show atm memory, and show memory commands and save the output.

Restart the RCM and ATM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s -Resource Database failed to initialize %d"

arg1: function name

arg2: error code

1.355   EVNT_ATM_SARCAM_DBERR1

Message operation=%s CAM record create failed %s %d - rc = %d
Description The system failed to insert a SAR CAM record into the database. This message occurred because there was insufficient memory to update the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show process atm, and show config atm commands and save the output.

Restart the RCM process.

The SAR CAM record is created during card configuration. Deleting and reconfiguring the card may resolve the issue (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 sarc index
Arg #4 error code returned from database
Replaces "%s -CAM record create failed %s %d - %d"

arg1: function name

arg2: pvc info

arg3: idx

arg4: error code

1.356   EVNT_ATM_SARCAM_DBERR2

Message operation=%s CAM record update failed %s %d - rc = %d
Description The system failed to update a SAR CAM record in the database. This message occurred because there was insufficient memory to update the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show process atm, and show config atm commands.

Restart the RCM process.

The SAR CAM count is created during card configuration. Deleting and reconfiguring the card may resolve the problem (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 sarc index
Arg #4 error code returned from database
Replaces "%s - CAM record update failed for %s %d - %d"

arg1: function name

arg2: pvc info

arg3: sar idx

arg3: error code

1.357   EVNT_ATM_SARCAM_DBERR3

Message operation=%s CAM record get failed %s %d - rc = %d
Description The system failed to read a SAR CAM record in the database. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show process atm, show config atm, and show atm resource cam slot/port commands and save the output.

Restart the RCM process.

The SAR CAM count is created during card configuration. Deleting and reconfiguring the card may resolve the issue (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 sarc index
Arg #4 error code returned from database
Replaces "%s - CAM record get failed for %s %d - %d"

arg1: function name

arg2: pvc info

arg3: sar idx

arg4: error code

1.358   EVNT_ATM_SARCAM_DBERR4

Message operation=%s Unable to delete all cam records for %s - rc = %d
Description The system failed to remove a SAR CAM record from the database. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show process atm, show config atm, and show atm resource cam slot/port commands. Save the output and the log files.

Restart the RCM process.

The SAR CAM count is created during card configuration. Deleting and reconfiguring the card may resolve the issue (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code returned from database
Replaces "%s - Unable to delete all cam records for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.359   EVNT_ATM_SARCAMDECERR

Message operation=%s - Failed to free SAR CAM resources for %s %d
Description The system failed to free SAR CAM resources when removing ATM PVCs. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Restart the RCM process or remove the ATM card and re-create it (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Cannot free SAR CAM resources for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.360   EVNT_ATM_SARCAMINCERR

Message operation=%s - Failed to allocate SAR CAM resources for %s %d
Description The system failed to allocate CAM resources for an ATM PVC.

This message occurred because there were not enough available CAM entries for ATM PVCs or the system detected a corrupt database record.

Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Failed to allocate SAR CAM resources for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.361   EVNT_ATM_SAR_DNLD

Message %s download failed rc=%#x sar %d
Description The ATMd process failed to download the configuration to the SARC. Arg #1 indicates which download failed.
Severity LOG_ERR
Action Restart the ATMd process to download the configuration again.

Save the log files and contact customer support to investigate the problem.

Arg #1 current operation
Arg #2 error code
Arg #3 sar idx

1.362   EVNT_ATM_SARHWDB_ERR

Message operation=%s SAR hardware type %d do not match that of database %d
Description The system failed to create a PVC because of invalid SAR hardware configuration. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show config atm, show atm memory, and show memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 SAR hardware type
Arg #3 hardware type in database
Replaces "SAR hardware type %d do not match that of database %d"

arg1: new sar hardware type

arg2: current sar hardware type

1.363   EVNT_ATM_SARIMGGET_ERR

Message operation=%s cannot obtain SAR image type for slot %d
Description The system failed to obtain a SAR record from the database. This message occurred because of resource errors or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show atm memory, and show memory commands and save the output.

Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 slot information
Replaces "%s - cannot obtain SAR image type for slot %d"

arg1: function name

arg2; slot

1.364   EVNT_ATM_SARPG_DBERR1

Message operation=%s Unable to create new free CAM page for %s - rc = %d
Description The system failed to create a SAR page record. This message occurred because there was insufficient memory to update the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show process atm, show config atm, and show atm resource cam slot/port commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code returned from database
Replaces "%s - Unable to create new free CAM page for %s"

arg1: function name

arg2: pvc info

1.365   EVNT_ATM_SARPG_DBERR2

Message operation=%s Page record update failed for %s %d- rc = %d
Description The system failed to update a SAR page record. This message occurred because there was insufficient memory to update the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show process atm, show config atm, and show atm resource cam slot/port commands. Save the command output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 sarc idx
Arg #4 error code returned from database

1.366   EVNT_ATM_SARPG_DBERR3

Message operation=%s Unable to find allocated CAM page %s - rc = %d%s - Unable to create new free CAM page for %s
Description The system failed to obtain a SAR page record from the database. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show process atm, show config atm, and show atm resource cam slot/port commands. Save the command output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code returned from database

1.367   EVNT_ATM_SARPG_DBERR4

Message operation=%s Unable to delete all page records for %s - rc = %d
Description The system failed to remove the SAR page records for a slot. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show process atm, show config atm, and show atm resource cam slot/port commands.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code returned from database
Replaces "%s - Unable to delete all page records for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.368   EVNT_ATM_SARPG_DBERR5

Message operation=%s Unable to release new free CAM page for %s - rc = %d
Description The system failed to release a SAR page record. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show process atm, show config atm, and show atm resource cam slot/port commands. Save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code returned from database
Replaces "%s - Unable to release new free CAM page for %s"

arg1: function name

arg2: pvc info

1.369   EVNT_ATM_SARPOUTDECERR

Message operation=%s Failed to free SAR resource for punch out %s - %d
Description The system failed to free scoreboard resources when returning a static PVC back to the explicit or on-demand range. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Restart the RCM or ATM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Failed to provision for %s - %d"

arg1: function name

arg2: pvc info

arg3: error code

1.370   EVNT_ATM_SARPOUTINCERR

Message operation=%s Failed to allocate SAR resource for punch out %s - %d
Description The system failed to free SAR resources when returning a static PVC to the explicit or on-demand range. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Failed to provision for %s - %d"

arg1: function name

arg2: pvc info

arg3: error code

1.371   EVNT_ATM_SARPROFCNGERR

Message operation=%s Failed to apply new profile attribute for %s - %d
Description The system failed to apply a new profile attribute to a PVC. This message occurred because there insufficient resources to support the change or the system detected a corrupt database record.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Failed to provision for %s - %d"

arg1: function name

arg2: pvc info

arg3: error code

1.372   EVNT_ATM_SARQOSDECERR

Message operation=%s SAR Failed to deprovision atmwfq for %s %d
Description The system failed to free QoS resources for a PVC. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Failed to deprovision atmwfq for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.373   EVNT_ATM_SARQOSINCERR

Message operation=%s SAR Failed to provision atmwfq for %s %d
Description The system failed to apply a new QoS attribute to a PVC. This message occurred because there were insufficient resources available for the transaction or the system detected a corrupt database record.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Failed to provision atmwfq for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.374   EVNT_ATM_SAR_REPLY

Message sar reply from %s status %d-%d on sarc no. %d
Description The SARC reply returned an error.
Severity LOG_ERR
Action Contact customer support to investigate this general failure.
Arg #1 current operation
Arg #2 ATM status
Arg #3 SARC status
Arg #4 sar idx

1.375   EVNT_ATM_SARRESCRT_ERR

Message operation=%s Failed to create SAR resource for %s rc %d
Description The system failed to create SAR resource records when creating an ATM card. This message occurred because there was insufficient memory to create the records or the system detected a corrupt database record. See the EVNT_ATM_CAMCARDCRT_ERR, EVNT_ATM_SBCARDCRT_ERR, and EVNT_ATM_WREDCARDCRT_ERR messages.
Severity LOG_ERR
Action Enter the show config atm, show atm memory, and show memory commands and save the output.

Restart the RCM process or remove the card and reconfigure it.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s failed to allocate SAR resources for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.376   EVNT_ATM_SARRESDEC_ERR

Message operation=%s Failed to free SAR resource for %s rc %d
Description The system failed to free SAR resources when removing PVCs or deactivating CCOD PVCs. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show config atm, show atm memory, and show memory commands and save the output.

Restart the RCM and ATM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Failed to release SAR resource for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.377   EVNT_ATM_SARRESDEL_ERR

Message operation=%s Failed to delete SAR resource for %s rc %d
Description The system failed to delete SAR resource records when removing the configuration of an ATM card. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Enter the show config atm, show atm memory, and show memory commands and save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s fail to allocate SAR resources for %s rc %d"

arg1: function name

arg2: pvc info

arg3: error code

1.378   EVNT_ATM_SARRESINC_ERR

Message operation=%s Failed to allocate SAR resource for %s rc %d%s - Failed to allocate SAR resource for %s %d
Description The system failed to allocate SAR resources when creating PVCs. This message occurred because there was insufficient memory to add the PVC or the system detected a corrupt database record.
Severity LOG_ERR
Action Enter the show config atm, show atm memory, and show memory commands and save the output.

Restart the RCM and ATM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code

1.379   EVNT_ATM_SARRSRECARDERR

Message operation=%s - SAR Resource Library failed to re-create card for %s %d
Description The system failed to initialize the SAR resource library after reloading a card or restarting a process. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Log messages associated with this failure were produced before this event occurred. See the instructions about the event in the log.

Restart the RCM process or remove the ATM card and re-create it (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - SAR Resource Library failed to re-create card for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.380   EVNT_ATM_SARRSREITERR

Message operation=%s - SAR Resource Library failed to initialize rc %d
Description The system failed to initialize the SAR resource library. This message occurred because one of the resources described in the following messages failed to initialize:

EVNT_ATM_CAMREINTERR

EVNT_ATM_SARSBDECERR

EVNT_ATM_WREDREINTERR

Severity LOG_ERR
Action Restart the RCM process or remove the ATM card and re-create it (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "%s - SAR Resource Library failed to initialize %d"

arg1: function name

arg2: error code

1.381   EVNT_ATM_SARSBDECERR

Message operation=%s - Failed to free SAR scoreboard resources for %s %d
Description The system failed to free SAR scoreboard resources when removing an ATM PVC. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Restart the RCM process or remove the ATM card and re-create it (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Cannot free SAR WRED resources for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.382   EVNT_ATM_SARSBINCERR

Message operation=%s - Failed to allocate SAR scoreboard resources for %s %d
Description The system failed to allocate SAR scoreboard resources when creating ATM PVCs. This message occurred because SAR scoreboard resources are full or the system detected corrupt database records.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Failed to allocate SAR scoreboard resources for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.383   EVNT_ATM_SAR_SEND

Message sar send: from %s status %d-%d on sarc no. %d
Description The system failed to send a command to the ATM hardware. This message occurred because the hardware was not available or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, and show hardware card slot detail commands.

Restart the ATM process and reload the ATM card.

If the problem persists, contact customer support.

Arg #1 PVC info
Arg #2 hardware status code
Arg #3 hardware return code
Arg #4 SARC number
Replaces "%s - from %s status %d-%d on sarc no. %d"

arg1: function name

arg2: endpoint name

arg3: main status

arg4: sar status

arg5: sar idx

1.384   EVNT_ATM_SARWREDDECERR

Message operation=%s SAR Failed to free atmwfq for %s %d
Description The system failed to free a WRED resource for a PVC. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Failed to free SAR WRED allocated for profile for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.385   EVNT_ATM_SARWREDINCERR

Message operation=%s SAR Failed to allocate atmwfq for %s %d
Description The system failed to allocate WRED resources for a PVC. The message occurred because the SAR resources are full or the system detected corrupt database records.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Failed to allocate SAR WRED allocated for atmwfq for %s %d"

arg1: function name

arg2: pvc info

arg3: error code

1.386   EVNT_ATM_SBCARDCRT_ERR

Message operation=%s Cannot create SAR SB resources for %s - %d
Description The system failed to create a SAR scoreboard resource record when configuring an ATM card. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Deleting and reconfiguring the card may resolve the issue (this action affects service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Cannot create SAR SB resources for %s - %d"

arg1: function name

arg2: pvc info

arg3: error code

1.387   EVNT_ATM_SBCARDDEL_ERR

Message operation=%s Cannot delete SAR SB resources for %s - %d
Description The system failed to delete a scoreboard resource record when removing an ATM card configuration. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Cannot delete SAR SB resources for %s - %d"

arg1: function name

arg2: pvc info

arg3: error code

1.388   EVNT_ATM_SB_DBERR1

Message operation=%s Failed to create scoreboard record for %s - rc = %d
Description The system failed to insert a scoreboard record in the database. This message occurred because there was insufficient memory to update the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show process atm, show config atm, and show atm resource scoreboard slot/port commands. Save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code returned from database
Replaces "%s - Failed to create default scoreboard record for %s - %d"

arg1: function name

arg2: pvc info

arg3: error code

1.389   EVNT_ATM_SB_DBERR2

Message operation=%s Failed to update scoreboard record for %s - rc = %d
Description The system failed to update a scoreboard record in the database. This message occurred because there was insufficient memory to update the record or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show process, show config atm, and show atm resource scoreboard slot/port commands. Save the output.

Restart the RCM or ATM process.

The scoreboard record is created during port configuration. Deleting and reconfiguring the port may resolve the issue (this action impacts service)

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code returned from database
Replaces "%s - Database update failed for %s"

arg1: function name

arg2: pvc info

1.390   EVNT_ATM_SB_DBERR3

Message operation=%s Failed to retrieve scoreboard record for %s - rc = %d
Description The system failed to read a scoreboard record in the database. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show process atm, show config atm, and show atm resource scoreboard slot/port commands. Save the output.

Restart the RCM or ATM process.

The scoreboard record is created during port configuration. Deleting and reconfiguring the card may resolve the issue (this action impacts service).

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code returned from database
Replaces "%s - Failed to retrieve default scoreboard record for %s - %d"

arg1: function name

arg2: pvc info

arg3: error code

1.391   EVNT_ATM_SB_DBERR4

Message operation=%s Failed to delete scoreboard record for %s - rc = %d
Description The system failed to delete a scoreboard record from the database. This message occurred if the record did not exist or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show memory, show process, show config atm, and show atm resource scoreboard slot/port commands. Save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code returned from database

1.392   EVNT_ATM_SBLMT_ERR

Message operation='%s' Reached maximum number scoreboard %d/%d/%d for traffic type %d maximum: %d
Description The system failed to allocate more scoreboard resources for the current shaping type. This message occurred if the scoreboard resources reached the maximum limit or the system detected a corrupt database record.
Severity LOG_ERR
Action Check for low memory conditions by entering the show config atm and show atm resource scoreboard slot/port commands. Save the output.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 current scoreboard count for explicit PVCs
Arg #3 current scoreboard count for CCODs;
Arg #4 current scoreboard count for punch out PVCs;
Arg #5 request scoreboard numbers
Arg #6 shaping type
Replaces "%s - Reached maximum number of pvc for traffic type %d for %s"

arg1: function name

arg2: count

arg3: pvc info

1.393   EVNT_ATM_SBPNHOUTDECERR

Message operation=%s Failed to free sb resource for punch out %s - %d
Description The system failed to free scoreboard resources when returning a static PVC back to the explicit or on-demand range. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Failed to release sb resource for %s - %d"

arg1: function name

arg2: pvc info

arg3: error code

1.394   EVNT_ATM_SBPNHOUTINCERR

Message operation=%s Failed to allocate sb resource for punch out %s - %d
Description The system failed to allocate scoreboard resources for static PVCs within a range of CCOD PVCs. This message occurred because the scoreboard resources have reached the maximum limit or the system detected corrupt database records.
Severity LOG_ERR
Action Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 pvc info
Arg #3 error code
Replaces "%s - Failed to allocate sb resource for %s - %d"

arg1: function name

arg2: pvc info

arg3: error code

1.395   EVNT_ATM_SBREINTERR

Message operation=%s - Cannot re-initialize SAR SB resources - %d process: %d
Description The system failed to initialize scoreboard resource allocation after reloading a card or restarting a process. This message occurred because the system detected corrupt database records.
Severity LOG_ERR
Action Restart the RCM process or remove and reconfigure the ATM card (this action impacts service). If the problem persists, contact customer support.
Arg #1 current operation
Arg #2 pvc info
Arg #3 process ID
Replaces "%s - Cannot re-initialize SAR SB resources - %d"

arg1: function name

arg2: error code

1.396   EVNT_ATM_SENDEOF_ERR

Message operation=%s CFG EOF send error, rc %d
Description The system failed to send a config end message to the backend process. This message occurred because there was a resources error or the system detected a corrupt database record.
Severity LOG_ERR
Action Run the show tech-support command. Save the command output and the log files.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 error code
Replaces "CFG EOF send error %d"

arg1: error code

1.397   EVNT_ATM_SHAP_ERR

Message operation='%s' Unknown shaping type %d for %s
Description The current shaping type is not supported by ATM.
Severity LOG_ERR
Action Verify the shaping for the PVC by entering the show config atm and show atm profile detail commands. Save the output.

Correct the shaping for the PVC.

If the shaping is correct, restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 shaping type
Arg #3 pvc_info
Replaces "%s - Unknown shaping type %d for %s"

arg1: function name

arg2: shaping type

arg3: pvc info

1.398   EVNT_ATM_SHAPTYPE1_ERR

Message operation=%s - shaping (%d) not allowed with sar image type (%d)
Description The current shaping type is not supported by the hardware.
Severity LOG_ERR
Action Verify the shaping by entering the show config atm command. Save the output.

Use a supported shaping type; see the SmartEdge documentation for more information.

If the shaping is correct, restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 shaping type
Arg #3 SAR hardware type
Replaces "%s - shaping (%d) not allowed with sar image type (%d)"

arg1: function name

arg2: shaping type

arg3: sar image type

1.399   EVNT_ATM_SHAPTYPE2_ERR

Message operation=%s Cannot update profile to non-UBR shaping on sar image type (%d)
Description Non-UBR shaping is not supported by the current SAR image (VC-FAIR)

This error occurs because invalid shaping is configured.

Severity LOG_ERR
Action Verify the shaping by entering the show config atm command. Save the output.

Use a supported shaping type; see the SmartEdge documentation for more information.

If the shaping is correct, restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 SAR hardware type
Replaces "%s - shaping (%d) not allowed with sar image type (%d)"

arg1: function name

arg2: shaping type

arg3: sar image type

1.400   EVNT_ATM_SHAPTYPE3_ERR

Message operation=%s Cannot update profile shaping to UBRe for PVCs on ATM-OC3-2port or ATM-OC12-1port
Description UBRe shaping is not supported on ATM OC-3c/STM-1c 2-port or ATM OC-12c/STM-4c 1-port cards.

This error occurs because invalid shaping was configured.

Severity LOG_ERR
Action Verify the shaping by entering the show config atm command. Save the output.

Use a supported shaping type; see the SmartEdge documentation for more information.

Otherwise, restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Replaces "%s - Cannot update profile shaping to UBRe for PVCs on ATM-OC3-2port or ATM-OC12-1port"

arg1: function name

1.401   EVNT_ATM_SHAPTYPE4_ERR

Message operation=%s Cannot update profile shaping to UBRe for VC/VP tunnel
Description UBRe is not supported on VC tunnels.

This error occurs because invalid shaping is configured

Severity LOG_ERR
Action Verify the shaping type by entering the show config atm. Save the output.

Use a supported shaping type; see the SmartEdge documentation for more information.

Otherwise, restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Replaces "%s Cannot update profile shaping to UBRe for VC tunnel"

arg1: function name

1.402   EVNT_ATM_SHAPTYPE5_ERR

Message operation=%s validation failure of shaping (%d) on sar image type (%d) for %s, rc = %d
Description Shaping validation failed with the current SAR image.

This error occurs because invalid shaping type is entered.

Severity LOG_ERR
Action Verify the shaping type by entering the show config atm command. Save the output.

Use a supported shaping type; see the SmartEdge documentation for more information.

Otherwise, restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 shaping type
Arg #3 SAR image type
Arg #4 error code
Replaces "%s - validation failure of shaping (%d) on sar image type (%d) for %s, rc = %d"

arg1: function name

arg2: shaping type

arg3: sar image type

arg4: pvc info

arg5: error code

1.403   EVNT_ATM_SHAPTYPE6_ERR

Message operation=%s validation failure of shaping (%d) on sar hw type (%d) with num_cosq (%d) for %s, rc = %d
Description Shaping validation of CoS queues failed with the current SAR image.

This error occurs because an invalid shaping type was configured.

Severity LOG_ERR
Action Verify the shaping type by entering the show config atm command. Save the output.

Use a supported shaping type; see the SmartEdge documentation for more information.

Otherwise, restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 shaping type
Arg #3 SAR image type
Arg #4 number of CoS queues
Arg #5 error code
Replaces "%s - validation failure of shaping (%d) on sar hw type (%d) with num_cosq (%d) for %s, rc = %d"

arg1: function name

arg2: shaping type

arg3: sar image type

arg4: number of queues

arg5: pvc info

arg6: error code

1.404   EVNT_ATM_SHAPTYPE7_ERR

Message operation=%s - Invalid weight (%d) for this sar hw type %d (minimum of 4 required)
Description The shaping configured for the current SAR hardware type is invalid.
Severity LOG_ERR
Action Verify the shaping by entering the show config atm command (save the output).

Use a supported shaping type; see the SmartEdge documentation for more information.

Otherwise, restart the RCM or ATMd process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 configured "weight" value in shaping
Arg #3 hardware type

1.405   EVNT_ATM_SHOWCMD_ERR

Message operation=%s Invalid show command %d
Description The show command is invalid.

This error occurs because of database corruption.

Severity LOG_ERR
Action Enter the show configuration command and save the output.

Log off the current CLI session and log on again.

Restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 show command index
Replaces "Invalid show cmd %d for the MO profile request"

arg1: show command

1.406   EVNT_ATM_SHOWCRIT_ERR

Message operation=%s Invalid show criteria 0x%x
Description The "Invalid show criteria" message occurred because of database corruption.
Severity LOG_ERR
Action Enter the show configuration command and save the output.

Log off the current CLI session and log on again.

Otherwise, restart the RCM process.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 show critera

1.407   EVNT_ATM_SOCKET_ERR

Message operation: %s Cannot open socket for raw ATM packet; invARP is disabled
Description The system failed to open a connection for ATM packets. This error occurs because the hardware is not available.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, and show hardware card slot detail commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 current operation

1.408   EVNT_ATM_STARTENDVCI_ERR

Message operation=%s CCOD: start vci > stop vci: %d > %d
Description The VCI values are invalid. The system should have verified the VCI value.
Severity LOG_ERR
Action Correct the VCI value and re-create the CCOD range.
Arg #1 current operation
Arg #2 end vci value
Replaces "CCOD: start vci > stop vci: %d > %d"

arg1: vci

arg2: end vpi

1.409   EVNT_ATM_STARTENDVPI_ERR

Message operation=%s CCOD: start vpi > stop vpi: %d > %d
Description The VPI values are invalid. The system should have verified the VPI value.
Severity LOG_ERR
Action Correct the VPI value and re-create the CCOD range.
Arg #1 current operation
Arg #2 end vci value
Replaces "CCOD: start vpi > stop vpi: %d > %d"

arg1: vpi

arg2: end vpi

1.410   EVNT_ATM_STARTVCI_ERR

Message operation=%s CCOD: Invalid start vci: %d
Description The start VCI is invalid. The system should have verified the VCI value.
Severity LOG_ERR
Action Correct the VCI value and re-create the CCOD range.
Arg #1 current operation
Arg #2 vci value
Replaces "CCOD: Invalid start vci: %d"

arg1: vci

1.411   EVNT_ATM_STARTVPI_ERR

Message operation=%s CCOD: Invalid start vpi: %d
Description The start VPI is invalid. The system should have verified the VPI value.
Severity LOG_ERR
Action Correct the VPI value and re-create the CCOD range.
Arg #1 current operation
Arg #2 vpi value
Replaces "CCOD: Invalid start vpi: %d"

arg1: vpi

1.412   EVNT_ATM_STATDYNDB1_ERR

Message operation =%s Failed to insert pvc stat record for %s in the database rc=%d
Description The system failed to insert a PVC static record in the database. This message occurred because there was insufficient memory to update the record or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm memory, and show atm pvc slot/port vpi vpi vci vci detail commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code

1.413   EVNT_ATM_STATDYNDB2_ERR

Message operation =%s Failed to update pvc stat record for %s in the database rc=%d
Description Failed to update a PVC static record in the database. This message occurred because there was insufficient memory to update the record or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm memory, and show atm pvc slot/port vpi vpi vci vci detail commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s dyn pvc stat record insert failed rc=%#x, for %s"

arg1: function name

arg2: error type

arg3: pvc info

1.414   EVNT_ATM_STATDYNDB3_ERR

Message operation =%s Failed to get pvc stat record for %s in the database rc=%d
Description The system failed to read a PVC static record in the database. This message occurred if the record did not exist or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm memory, and show atm pvc slot/port vpi vpi vci vci detail commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code
Replaces "%s Failed to update PVC stat record %s rc %d"

arg1: function name

arg2: pvc info

arg3: error type

1.415   EVNT_ATM_STATDYNDB4_ERR

Message operation =%s Failed to remove pvc stat record for %s in the database rc=%d
Description The system failed to remove a PVC static record from the database. This message occurred if the record did not exist or the system detected corrupt database records.
Severity LOG_ERR
Action Collect the output of the show tech-support, show process atm diag detail, show atm memory, and show atm pvc slot/port vpi vpi vci vci detail commands.

Restart the ATM and RCM processes.

If the problem persists, contact customer support.

Arg #1 current operation
Arg #2 PVC info
Arg #3 error code

1.416   EVNT_ATM_SW1_ERR

Message %s: unable to process due to NULL pointers
Description During switchover, the system failed to reconstruct a subscriber.
Severity LOG_ERR
Action Check the state of the subscriber with the show subscriber command.

Check the subscriber's circuit with the show circuit summary command.

Check the subscriber's PVC with the show atm pvc command.

If the subscriber is down, manually reset the PVC to the dormant state with the clear atm circuit command.

Arg #1 switchover

1.417   EVNT_ATM_SW3_ERR

Message %s: unable to insert CCOD ISM evt node
Description During switchover, the system failed to reconstruct the specified subscriber because it failed to store the subscriber attributes. This is an abnormal internal failure that causes the subscriber to fail.
Severity LOG_ERR
Action Enter the clear atm circuit command to return the PVC to the dormant state.

Save the log files and contact customer support for further investigation.

Arg #1 switchover

1.418   EVNT_ATM_SW4_ERR

Message %s: unknown cct_atmcfg type encap type %x
Description During switchover, a subscriber encapsulation type was invalid. This is an abnormal condition that causes the subscriber to fail.
Severity LOG_ERR
Action Enter the clear atm circuit command to return the PVC to the dormant state.

Save the log files and contact customer support for further investigation.

Arg #1 switchover
Arg #2 encap type

1.419   EVNT_ATM_SW5_ERR

Message %s: unable to delete CCOD ISM evt node
Description During switchover, the system failed to reconstruct a subscriber because of cleanup. This is an abnormal condition but the subscriber session might still function.
Severity LOG_ERR
Action Check the state of the subscriber with the show subscriber command.

If the subscriber is down, enter the clear atm circuit to return the PVC to dormant.

Save the log files and contact customer support for further investigation.

Arg #1 switchover