1 | Contents of This Document |
2 | Master Command List |
3 | Global Configuration Commands |
4 | Context-Specific Configuration Commands |
5 | SCTP Commands |
6 | Operational Commands |
Copyright |
© Ericsson AB 2009–2011. All rights reserved. No part of this document may be reproduced in any form without the written permission of the copyright owner. | |||
Disclaimer |
The contents of this document are subject to revision without notice due to continued progress in methodology, design and manufacturing. Ericsson shall have no liability for any error or damage of any kind resulting from the use of this document. | |||
Trademark List |
|

1 Contents of This Document
This document provides links to all the commands used to configure, monitor, and troubleshoot Border Gateway Function (BGF) features on the SmartEdge® router. The lists include the master command list, global configuration commands, context-specific configuration commands, SCTP commands, and operational commands.
2 Master Command List
This section provides links to the syntax and usage guidelines of all Border Gateway Function (BGF) CLI commands in the SmartEdge OS:
- alarms h248-link-status
- bulkstats schema
- clear media-gateway [instance] mgc-group
- clear media-gateway [instance] statistics
- debug media-gateway manager
- debug sctp
- debug [standby] media-gateway [instance]
- default-realm
- dscp
- extended-port-range
- maximum
- maximum (realm)
- media-address-group
- media-gateway
- media-gateway-controller
- media-local-address
- mgc-group
- process mgd
- process mgmd
- profile
- qos mark out dcsp
- realm
- reserved calls
- segmentation
- show media-gateway [instance]
- show media-gateway [instance] circuit
- show media-gateway instance media-flow
- show media-gateway [instance] mgc-group
- show media-gateway [instance] statistics
- show process mgd
- show process mgmd
- show process sctp
- show sctp
- shutdown
- signaling-endpoint
- site
- timers
- transaction-response-ack
- transport
3 Global Configuration Commands
This section provides links to the commands used in the SmartEdge BGF as part of global configuration:
4 Context-Specific Configuration Commands
This section provides links to the commands used to configure the SmartEdge BGF within a specific context:
5 SCTP Commands
This section provides links to the commands used to monitor and administer the Stream Control Transmission Protocol (SCTP):
6 Operational Commands
This section provides links to the commands used to monitor and administer BGF features:
|